From: Jack Heney (jheneyccie@xxxxxxxxxxx)
Date: Thu Nov 09 2000 - 17:54:25 GMT-3
By default, only 75% of the available bandwidth can be used for
CBWFQ....768+256+134=1158/1544=75%...I can't remember the command off-hand,
but you can increase the maximum available percentage.
Jack
>From: "Lev Terebizh" <lter@rmconsulting.com>
>Reply-To: "Lev Terebizh" <lter@rmconsulting.com>
>To: "GroupStudy" <ccielab@groupstudy.com>
>Subject: CBWFQ
>Date: Thu, 9 Nov 2000 12:26:29 -0000
>
>Is any boudy in the know about this...
>
>I configureg few classes...
>
>
>class-map vlan-1
> match access-group 31
>class-map vlan-2
> match access-group 32
>class-map vlan-3
> match access-group 33
>!
>policy-map A
> class vlan-1
> bandwidth 768
> class vlan-2
> bandwidth 256
>!
>
>int s0/0 ---this is T1 csu/dsu
>-
>1544 bps bandwidth
> service-policy output A
>!
>
>
>And now... If I try to add more classes... I can't have more that 134
>Bandwith ..to add....so 768+256+134 not equal to 1544....
>
>What is the point?
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:43 GMT-3