From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Thu Nov 16 2000 - 15:03:17 GMT-3
That's what aggregate-addr command does. However you can't send same update
to route-A back. If you do, you got your self a nice loop.
Sam
> Halabi's book shows alot of route aggregation's for
> advertising routes to neighbors. Is there anyway to
> aggregates routes that are advertised to me.
>
> Ex.
> RouterA advertises 172.16.0.0/17 and 172.16.128.0/17
> to RouterB. This can be aggregrated to 172.16.0.0/16.
> Is there anyway RouterB can aggregate this before
> inserting it into it's routing table is RouterA is
> sending the more specific?
>
> Thanks,
> Bill
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:45 GMT-3