From: zhuqingliu (zql@xxxxxxxxxx)
Date: Fri Feb 09 2001 - 03:14:45 GMT-3
Hi,
According to the cisco CD, Local area mobility configuration need the follo
wing step:
1. enable proxy arp (default enabled)
2. enable ip mobile arp
3. redistirbute mobile host route in an routing protocol
4. enable bridge under interface
!**********************************
bridge 1 protocol ieee
access-list 10 permit 192.100.100.55
interface ethernet 0
ip mobile arp access-group 10
bridge-group 1
router eigrp 100
redistribute mobile metric 10 2000 255 1 1500
!************************************
But in my lab, w/o the "bridge-group 1" command LAM works correctly.
Am I missing something?
Best regards
Perry.Zhu
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:42 GMT-3