From: Nodir Nazarov (nodir@xxxxxxxxxxxx)
Date: Mon Feb 19 2001 - 19:47:05 GMT-3
Removed all authentication (don't see why I should), removed distribute
list and put route map (same things basically), but got sdame exact
results. I have done nssa without virtual links and it was fine...
Nodir
On Mon, 19 Feb 2001, Ali, Shahzad wrote:
> Ohmmmmmmm remove the ospf authentication and try the route-map on r3.
>
> I am able to see 192.168.x.x netwok on r1 but same thing on r2 !!!!!!! any
> input folkssssssssss.
>
> r2#sh ip os database ns
>
> OSPF Router with ID (172.1.5.5) (Process ID 1)
>
>
> Type-7 AS External Link States (Area 2)
>
> LS age: 233
> Options: (No TOS-capability, No Type 7/5 translation, DC)
> LS Type: AS External Link
> Link State ID: 0.0.0.0 (External Network Number )
> Advertising Router: 172.1.5.5
> LS Seq Number: 80000001
> Checksum: 0xB148
> Length: 36
> Network Mask: /0
> Metric Type: 2 (Larger than any link state path)
> TOS: 0
> Metric: 1
>
>
>
>
> !
> r3
> !
> !
> router ospf 1
> redistribute connected route-map connected
> network 172.1.56.0 0.0.0.255 area 2
> network 172.1.6.0 0.0.0.255 area 2
> area 2 nssa
> !
> ip classless
> access-list 1 permit 192.168.1.0 0.0.0.255
> access-list 1 permit 192.168.2.0 0.0.0.255
> route-map connected permit 10
> match ip address 1
>
>
>
>
> Regards,
>
> ShahzaD
>
> -----Original Message-----
> From: Nodir Nazarov [mailto:nodir@datatone.com]
> Sent: Monday, February 19, 2001 1:48 PM
> To: ccielab@groupstudy.com
> Subject: NSSA: No Type 7/5 translation
>
> Hello, Thr Group,
>
> I have a little problem with NSSA.
>
> Area0---R1---area2---R2----area3----R3---
>
> I have redistributed connected interfaces into R3, they show up on R2 as
> N2, but they don't show up on R1. Virtual link is fine as I see all
> networks on R3 and R1. HOwever on R2 I got : No Type 7/5 translation
> This is detail info I got on R2:
>
> #sh ip os da ns
>
> OSPF Router with ID (172.30.5.5) (Process ID 1)
>
>
> Type-7 AS External Link States (Area 3)
>
> Routing Bit Set on this LSA
> LS age: 1020
> Options: (No TOS-capability, No Type 7/5 translation, DC)
> LS Type: AS External Link
> Link State ID: 192.168.5.0 (External Network Number )
> Advertising Router: 10.10.10.10
> LS Seq Number: 80000003
> Checksum: 0xE23
> Length: 36
> Network Mask: /24
> Metric Type: 1 (Comparable directly to link state metric)
> TOS: 0
> Metric: 20
> Forward Address: 172.30.136.2
> External Route Tag: 0
>
>
> Here are configs:
>
> R3:
> router ospf 1
> redistribute connected metric-type 1
> network 172.30.136.0 0.0.0.255 area 3
> distribute-list 10 out connected
> area 0 authentication message-digest
> area 3 nssa
> !
> access-list 10 permit 192.168.5.0 0.0.0.255
> access-list 10 permit 192.168.55.0 0.0.0.255
>
> R2:
> router ospf 1
> network 172.30.112.0 0.0.0.255 area 2
> network 172.30.136.0 0.0.0.255 area 3
> area 0 authentication message-digest
> area 2 authentication
> area 2 virtual-link 172.30.3.3 message-digest-key 1 md5 cisco
> area 3 nssa
> !
>
> R1:
> router ospf 1
> network 172.30.40.0 0.0.0.255 area 0
> network 172.30.104.0 0.0.0.255 area 2
> network 172.30.112.0 0.0.0.255 area 2
> area 0 authentication message-digest
> area 2 authentication
> area 2 virtual-link 172.30.5.5 message-digest-key 1 md5 cisco
> area 3 authentication message-digest
> !
>
> Thank you for any hint !
>
> Nodir
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:53 GMT-3