Qsaal on point-to-point PVCs

From: Leah Lynch (leah_lynch@xxxxxxxxxx)
Date: Fri Apr 06 2001 - 15:36:18 GMT-3

• Next message: Jerry Hutcheson: "OSPF Distribute-list"
• Previous message: Pickell, Aaryn: "RE: Suppress an AS number in a As path ..."
• Next in thread: xander: "Re: Qsaal on point-to-point PVCs"
• Maybe reply: xander: "Re: Qsaal on point-to-point PVCs"
• Maybe reply: Nodir Nazarov: "Re: Qsaal on point-to-point PVCs"
• Maybe reply: Greg Ferro: "Re: Qsaal on point-to-point PVCs"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I do not have access to ATM on my home lab so I am just reading about it to
learn. I am looking at Lab 13 from CCbootcamp and I have noticed that they
are using qsaal for the point-to-point subinterface PVCs. I am also looking
at the Doc CD and I notice that they only use qsaal for LANE and SVCs. Is it
necessary to specify qsaal on a PVC?

CCbootcamp:

 interface ATM0/0
 no ip address
 no ip directed-broadcast
 atm pvc 1 0 5 qsaal
 atm pvc 2 0 16 ilmi
 no atm ilmi-keepalive
 atm ilmi-pvc-discovery subinterface
!
interface ATM0/0.5 point-to-point
 ip address 172.16.2.1 255.255.255.0
 no ip directed-broadcast
 ip pim sparse-dense-mode

Doc CD:

interface atm 2/0
  pvc RouterA 0/16 ilmi
  exit
  atm ilmi-pvc-discovery subinterface
  exit
!
interface atm 2/0.1 multipoint
  ip address 172.21.51.5 255.255.255.0

Leah Lynch

• Next message: Jerry Hutcheson: "OSPF Distribute-list"
• Previous message: Pickell, Aaryn: "RE: Suppress an AS number in a As path ..."
• Next in thread: xander: "Re: Qsaal on point-to-point PVCs"
• Maybe reply: xander: "Re: Qsaal on point-to-point PVCs"
• Maybe reply: Nodir Nazarov: "Re: Qsaal on point-to-point PVCs"
• Maybe reply: Greg Ferro: "Re: Qsaal on point-to-point PVCs"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:41 GMT-3