From: Virnoche, Phil (phil.virnoche@xxxxxxxxx)
Date: Sat May 05 2001 - 20:55:53 GMT-3
here is my story,.......
I just dont get the route maps in the redistrubution process on R6 and R1
between OSPF and BGP...... Could someone be so kind as to explain their
content/intent?
I have spent the last hour and a half jumping between routers to see
anomilies.....
TIA !!!!
Philip G. Virnoche
Sr. Network Engineer - AT&T Wireless
phone: 425.580.5239
cell: 206.601.3134
"HAM AND EGGS - A day's work for a chicken; A lifetime commitment for a
pig."
-----Original Message-----
From: Andrew Lennon [mailto:andrew.lennon@nscglobal.com]
Sent: Saturday, May 05, 2001 2:49 PM
To: Lange Gerhard; Ccielab@groupstudy.com
Subject: RE: Router as a TFTP-Server
Lange,
Have you enabled udp services in your config?
service udp-small-servers
Andy
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Lange Gerhard
Sent: 05 May 2001 22:27
To: Ccielab@groupstudy.com
Subject: Router as a TFTP-Server
Hello,
today I tried to test the feature "Autoinstall", but it didn't function.
So I tried to make only a TFTP file copy between two Cisco routers.
One of these router I've configured as TFTP-Server (172.25.10.50/24):
tftp-server slot1:network-confg
And than I've copied the configuration of the TFTP-Server in his local
Flash Memory:
copy run slot1:network-confg
During the attempt to load this configuration from the "TFTP-Server",
I get the following error message (TFTP-Client: 172.25.10.5/24):
r5#copy start tftp
Address or name of remote host []? 172.25.10.50
Destination filename [r5-confg]? network-confg
TFTP: error code 2 received - Access denied
%Error opening tftp://172.25.10.50/network-confg (Undefined error)
r5#
What is going wrong here ?
Ciao,
Gerhard
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:34 GMT-3