From: Annu Roopa (annu_roopa@xxxxxxxxx)
Date: Mon Feb 18 2002 - 12:37:19 GMT-3
Rajeev,
Just in case u have not read any one of these
docs...under different environments.
http://www.cisco.com/warp/public/105/34.html
http://www.cisco.com/warp/public/104/26.html
http://www.cisco.com/warp/public/103/16.html
http://www.cisco.com/warp/public/459/22.html
http://www.cisco.com/warp/public/123/5.html
I have found them very helpful.
Bye,
Annu
--- RSiddappa@NECBNS.com wrote:
> Hi,
>
> I am trying to understand the Distribute-list again,
> (nth time)
>
> I.
>
> Distribute-list 1 in serial 0
>
> Under any routing process will work ( Regardless of
> link state or
> Distance vector).
> Provided that routing protocol is running on that
> interface.
>
>
> II.
>
> Distribute-list 1 out (RIP/OSPF/IGRP...)
>
> Example :
>
> Router OSPF 10
> redistribute RIP
> netwrok .....
> Distribute-list 1 out rip
>
>
> This is telling that give out the routes learned by
> RIP process, if
> they permitted by access-list 1.
>
> It is not saying that give out the routes if it
> learned from RIP
> through redistribution and permitted access-list.
> The redistribution statement under OSPF should not
> make any
> difference.
>
>
> I am asking very one pls verify and correct me if I
> am wrong.
>
>
> Rajeev.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:26 GMT-3