From: Joe Higgins (netsat@optonline.net)
Date: Tue Sep 03 2002 - 11:29:21 GMT-3
That was it. I put "ip rsvp bandwidth" command on the serial interfaces
and it now works. Thank you.
"Desimone, Aurelio" wrote:
>
>
> did you enable rsvp on the interfaces between these two routers?
>
> Aurelio
>
> -----Original Message-----
> From: Joe Higgins [mailto:netsat@optonline.net]
> Sent: Tuesday, September 03, 2002 7:26 AM
> To: 'ccielab@groupstudy.com'
> Subject: dlsw rsvp not working
>
> I configured dlsw rsvp per
>
> ttp://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t3/rsvp.htm
>
> and it is not working? What am I missing? Debug ip rsvp shows
> nothing.
> Sh ip rsvp sender, res, req shows the following: Dlsw shows
> connected.
> IOS is 12.1.
>
> r8#sh ip rsvp send
> To From Pro DPort Sport Prev Hop I/F
> BPS Bytes
> r8#
>
> In my configuration R8 is directly connected to R6 with the following
> configurations:
> R8
> dlsw local-peer peer-id 172.28.2.8
> dlsw rsvp 40 10
> dlsw remote-peer 0 tcp 172.28.2.6
>
> R6
> dlsw local-peer peer-id 172.28.2.6
> dlsw rsvp 40 10
> dlsw remote-peer 0 tcp 172.28.2.8
> _________________________________________________________________
> Commercial lab list: http://www.groupstudy.com/list/commercial.html
> Please discuss commercial lab solutions on this list.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:42 GMT-3