From: Mahmud, Yasser (YMahmud@Solutions.UK.ATT.com)
Date: Mon Sep 16 2002 - 19:25:37 GMT-3
When trying to connect using hostname from a router and for the router not
to display the ip address it is trying to connect use the command
ip telnet quiet-mode
For a custom message to appear on the router if connection fails then use
busy-message Display message when connection to host fails
Yasser Mahmud
> -----Original Message-----
> From: Paglia, John (USPC.PCT.Hopewell) [SMTP:JPaglia@NA2.US.ML.com]
> Sent: Monday, September 16, 2002 9:31 PM
> To: 'ccielab@groupstudy.com'
> Subject: Telnet Errors
>
> Group,
>
> Today, someone asked me how you can configure routers so that when a
> telnet
> is unsuccessful, no error messages are returned. I assume that only a
> return
> of the prompt is desired, and I don't think disabling console logging is
> the
> desired result.
>
> I don't know off-hand, and research is yielding very little. Can someone
> please assist with this?
>
> Thanks,
> Pags
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:54 GMT-3