From: Paglia, John (USPC.PCT.Hopewell) (JPaglia@NA2.US.ML.com)
Date: Wed Sep 18 2002 - 23:39:22 GMT-3
I assume you have connectivity btwn the tunnel points, correct? If ya can't
ping the tunnel endpoints, the tunnel will be useless. At that point, IPX is
definately the way to go...it should work.
Pags
> -----Original Message-----
> From: Justin Cook [SMTP:Justin.Cook@computerland.co.nz]
> Sent: Wednesday, September 18, 2002 9:56 PM
> To: 'ccielab@groupstudy.com'
> Subject: NLSP Lab issue
>
> Had a question which said Configure NLSP between 2 routers (Loopbacks have
> IPX addresses)you are not allowed to put Network addresses "on any type of
> link between the 2 routers", the routers are joined via Ethernet.
>
> I used a tunnel between the 2 loopbacks running IPXWAN between them.
>
> Unable to form a neighbor though
>
> Will the above work? I am going to try between the Ethernet ports now
>
> Any pointers would be appriecatiated
>
> Thanks
>
>
> --
> Justin Cook
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3