From: HP-Singapore,ex4 ("VANGADASALAM,SURENDRAN)
Date: Thu Sep 19 2002 - 07:29:50 GMT-3
Hi guys,
I have placed everything that was metioned. Still does not solve the
problem.
MTU - 1500
Birdge 1 protocol ieee
-----Original Message-----
From: Jihene Bouraoui [mailto:BouraouiJ@globalknowledge.net]
Sent: 19 September 2002 17:34
To: 'steven.j.nelson@bt.com '; 'surendran.vangadasalam@hp.com ';
'ccielab@groupstudy.com '
Subject: RE: SR/TLB
I have the same problem, and the command bridge 1 protocol ieee doesn't
make ay effect
-----Original Message-----
From: steven.j.nelson@bt.com
To: surendran.vangadasalam@hp.com; ccielab@groupstudy.com
Sent: 19/09/2002 10:12
Subject: RE: SR/TLB
you don't have bridge 1 protocol ieee under the global config.
Thanks
Steve
-----Original Message-----
From: VANGADASALAM,SURENDRAN (HP-Singapore,ex4)
[mailto:surendran.vangadasalam@hp.com]
Sent: 19 September 2002 08:39
To: Ccielab (E-mail)
Subject: SR/TLB
Hi Group,
I have a problem with my SR/TLB configuration.
R8-------(Token Ring)---------R13--------(Ethernet)---R14
I am trying to ping from the R8 to R14. But am unable to do so. The
token
ring is connected to 3920 switch. Below is the configuration. I have
also
turned off IP routing in R13.
Router 13
source-bridge ring-group 10
source-bridge transparent 10 11 1 1
!
interface Ethernet0/0
ip address 1.1.1.3 255.255.255.0
no ip route-cache
half-duplex
bridge-group 1
!
interface TokenRing0/0
ip address 1.1.1.4 255.255.255.0
no ip route-cache
ring-speed 16
source-bridge 1 1 10
Router 8
interface TokenRing4/0
ip address 1.1.1.2 255.255.255.0
ring-speed 16
Router 14
interface Ethernet 0/0
ip address 1.1.1.1 255.255.255.0
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3