From: Chris Larson (clarson52@comcast.net)
Date: Thu Sep 19 2002 - 07:26:46 GMT-3
If the loopback is in an area then you need to use area-range to
summarisearea routes. Summary-address is usually used on ASBR's to summarize
external routes
----- Original Message -----
From: "Justin Cook" <Justin.Cook@computerland.co.nz>
To: <ccielab@groupstudy.com>
Sent: Wednesday, September 18, 2002 9:56 PM
Subject: FW: OSPF summary on a Loopback
> Thanks everyone I used summary-address command instead of the area 30
range
> command which worked well
>
> Thanks for your help
>
>
> --
> Justin Cook
>
>
> -----Original Message-----
> From: Justin Cook [mailto:Justin.Cook@Computerland.co.nz]
> Sent: Thursday, 19 September 2002 9:05 a.m.
> To: 'ccielab@groupstudy.com'
> Subject: OSPF summary on a Loopback
>
> Question is to summarise a 30 address on a loopback to a 24 address. The
> loopback is in Area 30 and summarizing to backbone
>
> I used the summary-address 172.16.20.0 255.255.255.0
>
> But other OSPF routers not taking the summary
>
> Anything I am missing
>
> Thanks
>
>
> --
> Justin Cook
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3