From: Pieter Jordaan (pieterj@is.co.za)
Date: Fri Sep 20 2002 - 02:24:28 GMT-3
Guys
Apart from the L3 capabilities, are there any major differences between the
2950 and the 3550, Talking from a pure switching point of view.
IE: Do you configure vLAN, trunks, ether channel and STP in the same way? Do
you also add the management IP in the same way or is it different?
Thanks
"This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates ("the
sending company ") any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business or
client engagement letter . The sending company does not accept liability for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail."
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:57 GMT-3