From: Joe Martin (jmartin@capitalpremium.net)
Date: Tue Sep 24 2002 - 15:41:21 GMT-3
Persio,
Read the thread on OSPF Dead Interval.
If you change only the hello timer all the other timers are automatically
updated.
Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Persio Pucci
Sent: Tuesday, September 24, 2002 12:01 PM
To: ccielab@groupstudy.com
Subject: Soile's Skynet Lab
Folks,
going through Soile's Skynet lab, I came upon one doubt: You are supposed to
chenge the OSPF Hello timer to 60s on R3. Also, you are supposed to overcome
the different network problem between R1, R2 and R3 without using "ip ospf
network", and by this, you have to change also the timers. It's okay then
that
the three routers agree upon 60s hello timers.
My question is: shoudn't the dead timers be changed as well? I am asking
this
because on the Skynet solution guide, there's no change on the dead timer
for
any router.
Regards,
Persio
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:01 GMT-3