From: Young K. Bae (ybae@cisco.com)
Date: Fri Sep 27 2002 - 23:06:58 GMT-3
Hi Bob,
The solution stated in the document requires static routes, which I'm not
allowed to do. Is there any other way to accomplish the object without
using static routes?
Thanks,
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Bob Sinclair
> Sent: Friday, September 27, 2002 7:17 PM
> To: Young K. Bae; ccielab@groupstudy.com
> Subject: Re: What if OSPF routes have shorter masks than RIP?
>
>
> Try this link:
>
> http://www.cisco.com/warp/public/105/52.html
>
> It is ugly!
>
> ----- Original Message -----
> From: "Young K. Bae" <ybae@cisco.com>
> To: <ccielab@groupstudy.com>
> Sent: Friday, September 27, 2002 8:51 PM
> Subject: What if OSPF routes have shorter masks than RIP?
>
>
> > Guys,
> >
> > I'm sure this question has been asked many times before,
> but can someone
> > kindly explain to me again? There are some /25 routes in
> OSPF Area0 that I
> > need to redistribute into RIP v1. The serial link that
> connects R1 with R2
> > has a /26 mask. How can I inject /25 OSPF routes into a
> classful routing
> > domain in a case such as this?
> >
> > R1 --- 172.16.12.0/26 (RIPv1) --- R2 ---- 172.16.100.0/29
> (Area1) --- R5
> > 172.16.200.0/25 (Area0)
> >
> > Thanks in advance,
> >
> > Young
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:05 GMT-3