From: Song Mu (songmu@yahoo.com)
Date: Sat Sep 28 2002 - 23:18:08 GMT-3
This is a working config:
This is R1's interfaces:
---------------------------------------------------------
Ethernet0 172.168.80.1 YES NVRAM up up
Loopback0 137.20.81.1 YES manual up up
Loopback1 137.20.80.1 YES manual up up
Serial0 137.20.86.1 YES NVRAM up up <--Connect to R2
TokenRing0 137.20.82.1 YES manual up up
--------------------------------------------------------
This is R1's Configuration:
!
router rip
redistribute connected
passive-interface Serial0
network 137.20.0.0
neighbor 137.20.64.6
R2's Interfaces:
-------------------------------------------------
Ethernet0 137.20.64.6 YES NVRAM up up
Loopback0 137.20.60.1 YES NVRAM up up
Serial0 137.20.86.2 YES NVRAM up up <-----Connect to R1
------------------------------------------------
R2's config:
router rip
passive-interface Serial0
network 137.20.0.0
neighbor 137.20.86.1
---------------------------------
r2#sh ip route rip
137.20.0.0/16 is variably subnetted, 15 subnets, 4 masks
R 137.20.81.0/24 [120/1] via 137.20.86.1, 00:00:20, Serial0
R 137.20.80.0/24 [120/1] via 137.20.86.1, 00:00:20, Serial0
R 137.20.82.0/24 [120/1] via 137.20.86.1, 00:00:20, Serial0
R 172.168.0.0/16 [120/1] via 137.20.86.1, 00:00:20, Serial0
Note: 137.20.81.86.0/24 is not there
HTH,
Song
passive interface e0
neighbor
--- Robert Massiache <robert2140@hotmail.com> wrote:
> David,
> Inorder for RIP to send and receive the broadcast(v1) or
> multicast(v2) you
> need to have the Ethernet subnet enabled with RIP but we are left
> with a
> choice of not advertising it upfront. You are not permitted to use
> the the
> network statement under router rip 151.1.0.0 anyway. If you use it,
> its just
> a normal case direct advt.
>
> We need to seek a back door advertisement.
>
> thanks
>
>
> >From: "Voss, David" <dvoss@heidrick.com>
> >To: "'Robert Massiache'" <robert2140@hotmail.com>
> >Subject: RE: Can't receive the routes...Help!
> >Date: Sat, 28 Sep 2002 17:46:42 -0500
> >
> >Robert,
> >
> >Why not this?
> >
> >router rip
> >network 151.1.0.0
> >network 131.1.0.0
> >distribute-list 1 out
> >
> >access-list 1 permit 131.1.0.0 0.0.255.255
> >
> >He states he does not want to advertise ethernet, but ethernet is
> directly
> >connected, so R2 knows about it anyway. Regardless, I don't know
> why the
> >above config would not work for what he is asking.
> >
> >
> >
> >
> >-----Original Message-----
> >From: Robert Massiache [mailto:robert2140@hotmail.com]
> >Sent: Saturday, September 28, 2002 5:17 PM
> >To: prashanthcm@yahoo.com; ccielab@groupstudy.com
> >Subject: Re: Can't receive the routes...Help!
> >
> >
> >the catch here you are not allowed to advertise the ethernet, only
> allowed
> >to advertise the loop 20 which is 131.1.100.1 255.255.255.0
> >
> >so we are trying the alternate methods of indirect
> advertisements...whcih
> >don't work including the redistribute connected with a rotue map
> matching
> >interface e0.
> >
> >thanks
> >
> >
> > >From: Prashanth <prashanthcm@yahoo.com>
> > >Reply-To: Prashanth <prashanthcm@yahoo.com>
> > >To: Robert Massiache <robert2140@hotmail.com>,
> ccielab@groupstudy.com
> > >Subject: Re: Can't receive the routes...Help!
> > >Date: Sat, 28 Sep 2002 13:31:13 -0700 (PDT)
> > >
> > >just advertizing the
> > >151.1.0.0 in RIP doesnt work? it should be simple as
> > >that... its working in my setup...
> > >
> > >prashanth
> > >
> > >
> > >--- Robert Massiache <robert2140@hotmail.com> wrote:
> > > > Hi all,
> > > > I got a questins for you all. Here the R2 is an
> > > > unkown router running RIP.
> > > > No idea about what version. You need to receive the
> > > > rotues from R2.
> > > >
> > > >
> > > > loop20-R1----Ethernet----R2
> > > >
> > > > R1:
> > > >
> > > > interface loop 20
> > > > 131.1.100.1 255.255.255.0
> > > >
> > > > interface Ethernet0
> > > > ip address 151.1.100.1 255.255.255.0
> > > >
> > > > router rip
> > > > redistribute connected metric 2 route-map west
> > > > network 131.1.0.0
> > > >
> > > > route-map west permit 10
> > > > match interface e0
> > > >
> > > > route-map west permit 20
> > > > !
> > > > end.
> > > >
> > > >
> > > > How can I configure R1 to receive those R2 routes. I
> > > > should only advertise
> > > > the loop 20 I should not advt. the Ethernet.
> > > >
> > > > In all the above trials the RIP is not getting
> > > > enabled on the Ethernet even
> > > > if I use access-list option insdie the route-map.
> > > > Any help would be
> > > > appreciated.
> > > >
> > > >
> > > > thanks
> > > >
> > > >
> > >_________________________________________________________________
> > > > Send and receive Hotmail on your mobile device:
> > >http://mobile.msn.com
> > >
> > >
> > >__________________________________________________
> > >Do you Yahoo!?
> > >New DSL Internet Access from SBC & Yahoo!
> > >http://sbc.yahoo.com
> >
> >
> >
> >
> >_________________________________________________________________
> >Send and receive Hotmail on your mobile device:
> http://mobile.msn.com
>
>
>
>
> _________________________________________________________________
> Join the worlds largest e-mail service with MSN Hotmail.
> http://www.hotmail.com
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:06 GMT-3