Can't receive the routes...Help!

From: Robert Massiache (robert2140@hotmail.com)
Date: Sat Sep 28 2002 - 06:16:19 GMT-3

Hi all,
I got a questins for you all. Here the R2 is an unkown router running RIP.
No idea about what version. You need to receive the rotues from R2.

loop20-R1----Ethernet----R2

R1:

interface loop 20
131.1.100.1 255.255.255.0

interface Ethernet0
ip address 151.1.100.1 255.255.255.0

router rip
redistribute connected metric 2 route-map west
network 131.1.0.0

route-map west permit 10
match interface e0

route-map west permit 20
!
end.

How can I configure R1 to receive those R2 routes. I should only advertise
the loop 20 I should not advt. the Ethernet.

In all the above trials the RIP is not getting enabled on the Ethernet even
if I use access-list option insdie the route-map. Any help would be
appreciated.

thanks

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:05 GMT-3