From: Ayman Hamza (ayhamza@cisco.com)
Date: Thu Oct 03 2002 - 10:01:13 GMT-3
Hi Donny;
No need to use authetication on Virtual-link as LONG AS THE TRANSIT
AREA DOESN'T USE AUTHETICATION. I have sent a reply to Chenyan for the
necessar command to configure on R2 .
Regards;
Ayman
> From nobody@groupstudy.com Thu Oct 3 12:34:59 2002
> Subject: Re: ospf auth problem
> To: "chenyan" <chenyan@deeptht.com.cn>
> Cc: "ccielab" <ccielab@groupstudy.com>, nobody@groupstudy.com
> From: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
> Date: Thu, 3 Oct 2002 18:20:52 +0800
> MIME-Version: 1.0
> X-ASK-Info: Whitelist match
> Sender: nobody@groupstudy.com
> Reply-To: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
>
> Hi Chenyan
>
> how bout R2. the virtual-link on R2 needs to use authentication as well. and as for virtual link
> adjency, check you log see if it's full adjency and then do a show ip ospf virtual-link.
> make sure the state is FULL, something like the following
>
> Virtual Link OSPF_VL0 to router 10.129.72.37 is down
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 1, Cost of using 65535
> Transmit Delay is 1 sec, State DOWN, <<<<<<= this one should be FULL
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
>
> hope that helps.
>
> Donny
>
>
>
> "chenyan"
> <chenyan@deeptht. To: "ccielab" <ccielab@groupstudy.com>
> com.cn> cc:
> Sent by: Subject: ospf auth problem
> nobody@groupstudy
> .com
>
>
> 03-10-2002 17:49
> Please respond to
> "chenyan"
>
>
>
>
>
>
> hi,guys
>
> (area0)R1(area1)-------(area1)R2(area3)
> if there is no authentication everything is fine, the R1 can obtain the networks of area3, but when
> i used the md5 authentication in area0, the networks of area3 is not seen by R1, even I used the
> virtual-link authentication the R1 can still not see the networks of area3. But I can see all the
> virtual links are up.
> why?
>
> Thanks
>
>
>
>
>
> This message is for information purposes only and its content
> should not be construed as an offer, or solicitation of an offer,
> to buy or sell any banking or financial instruments or services
> and no representation or warranty is given in respect of its
> accuracy, completeness or fairness. The material is subject
> to change without notice. You should take your own independent
> tax, legal and other professional advice in respect of the content
> of this message. This message may contain confidential or
> legally privileged material and may not be copied, redistributed
> or published (in whole or in part) without our prior written consent.
> This email may have been intercepted, partially destroyed,
> arrive late, incomplete or contain viruses and no liability is
> accepted by any member of the Credit Agricole Indosuez group
> as a result. If you are not the intended recipient of this message,
> please immediately notify the sender and delete this message
> from your computer.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:38 GMT-3