From: Joe Chang (changjoe@earthlink.net)
Date: Sat Mar 15 2003 - 23:41:59 GMT-3
SVCs are not supported on a point-to-point sub:
http://www.cisco.com/warp/public/121/atm_svc.html#3
----- Original Message -----
From: "Gerry Hilton" <gerry.hilton@rogers.com>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Saturday, March 15, 2003 6:58 PM
Subject: ATM - Config for SVC on point-to-point subinterface
> Hi. Does anyone know if it is possible to have an ATM SVC on a
> point-to-point subinterface? If so, could you please provide a valid
> config? I am able to make it work on the main interface or a
> multipoint subinterface. The following is the non-working config - the
> ESI address has to be on the main interface as it's not allowed to be
> configured on the point-to-point one. All of the addresses, etc.,
> should be valid as they are used for working configs.
>
>
> Thanks,
> Gerry
>
> router6-4500-1#sh ru int atm0
> Building configuration...
>
> Current configuration : 129 bytes
> !
> interface ATM0
> no ip address
> pvc 0/5 qsaal
> !
> pvc 0/16 ilmi
> !
> atm esi-address 111122223366.00
> no atm ilmi-keepalive
> end
>
> router6-4500-1#sh ru int atm0.7
> Building configuration...
>
> Current configuration : 175 bytes
> !
> interface ATM0.7 point-to-point
> ip address 50.0.0.6 255.255.255.0
> !
> svc testsub nsap 39.1122334455667700020114BB.111122223355.00
> protocol ip 50.0.0.5 broadcast
> !
> end
>
> router5-4500-2#sh ru int atm0
> Building configuration...
>
> Current configuration : 168 bytes
> !
> interface ATM0
> no ip address
> no ip route-cache
> no ip mroute-cache
> pvc 0/16 ilmi
> !
> pvc 0/5 qsaal
> !
> atm esi-address 111122223355.00
> no atm ilmi-keepalive
> end
>
> router5-4500-2#sh ru int atm0.7
> Building configuration...
>
> Current configuration : 215 bytes
> !
> interface ATM0.7 point-to-point
> ip address 50.0.0.5 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> !
> svc subpoint nsap 39.1122334455667700020114BB.111122223366.00
> protocol ip 50.0.0.6 broadcast
> !
> end
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3