Configuring a VLAN for a bridge-group as a Native VLAN

From: Hamdi, Tarig (Tarig.Hamdi@dowjones.com)
Date: Wed Sep 10 2003 - 09:08:53 GMT-3

• Next message: Jung, Jin: "RE: boot ios from tftp"
• Previous message: Robert L. DuBell: "RE: log a TAC case"
• Next in thread: Hamdi, Tarig: "RE: Configuring a VLAN for a bridge-group as a Native VLAN"
• Maybe reply: Hamdi, Tarig: "RE: Configuring a VLAN for a bridge-group as a Native VLAN"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Folks,

In the section on BM_25234BM_1007077Configuring a VLAN for a bridge-group as
a Native VLAN Cisco ios 12.2 documentation gives the following example:

BM_1007276BM_1011450BM_45114BM_1007278

VLAN 20 for Bridge Group 1 with Native VLAN Example

wp1007279The following example configures VLAN 20 for bridge group 1 as a
native VLAN:
wp1007280
interface FastEthernet 4/1.100
wp1007281encapsulation dot1q 20 native
wp1007282bridge-group 1

Can anybody shed a light on what is happening in this example?

Regards

Tarig

• Next message: Jung, Jin: "RE: boot ios from tftp"
• Previous message: Robert L. DuBell: "RE: log a TAC case"
• Next in thread: Hamdi, Tarig: "RE: Configuring a VLAN for a bridge-group as a Native VLAN"
• Maybe reply: Hamdi, Tarig: "RE: Configuring a VLAN for a bridge-group as a Native VLAN"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:25 GMT-3