From: Hamdi, Tarig (Tarig.Hamdi@dowjones.com)
Date: Wed Sep 10 2003 - 09:22:13 GMT-3
For some reason the original email was messed up. Here is the original text.
Cisco IOS 12.2 documentation gives the following:
The following example configures VLAN 20 for bridge group 1 as a native
VLAN:
interface FastEthernet 4/1.100
encapsulation dot1q 20 native
bridge-group 1
Can somebody explain the above example?
Regards
Tarig
-----Original Message-----
From: Hamdi, Tarig
Sent: 10 September 2003 13:09
To: 'ccielab@groupstudy.com'
Subject: Configuring a VLAN for a bridge-group as a Native VLAN
Folks,
In the section on BM_25234BM_1007077Configuring a VLAN for a bridge-group as
a Native VLAN Cisco ios 12.2 documentation gives the following example:
BM_1007276BM_1011450BM_45114BM_1007278
VLAN 20 for Bridge Group 1 with Native VLAN Example
wp1007279The following example configures VLAN 20 for bridge group 1 as a
native VLAN:
wp1007280
interface FastEthernet 4/1.100
wp1007281encapsulation dot1q 20 native
wp1007282bridge-group 1
Can anybody shed a light on what is happening in this example?
Regards
Tarig
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:25 GMT-3