From: Chip Nielsen (chipn@intraworx.net)
Date: Sat Sep 13 2003 - 20:38:05 GMT-3
Hello,
Hoping someone can shed some light on a scenario I've been working on:
R1---R2---R3---R4
OSPF Area 0 between R1 and R2
IS-IS Level 1 between R2 and R3 (same area)
IS-IS Level 2 between R3 and R4 (different areas)
R3 is receiving Level 2 IS-IS routes from R4 which I then leak into
IS-IS Level 1 using
Redistribute isis level-2 to level-1 distribute-list 100
Access-list 100 permit ip any any
I am trying to redistribute the IS-IS inter-area routes into OSPF on
router R2:
redistribute isis level-1 subnets
R1 is only receiving one level-1 route (which shows as L1 in R2's
routing table), but it is not receiving any of the IS-IS inter-area (ia)
routes.
Is it even possible to redistribute leaked inter-area routes on a L1
router into another routing protocol? It seems to me that this would be
incorrect and
R2 should actually be a level-2 router.
Any help would be appreciated.
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:27 GMT-3