From: wangstone373 (wangstone373@hotmail.com)
Date: Thu Nov 27 2003 - 00:53:54 GMT-3
in Callback server, there is no dialer map, how server dial back to client?
----- Original Message -----
From: "Phil" <ciscostudent1@yahoo.com.br>
To: "Zalimas Azaaaz" <zalzal50@yahoo.gr>; <ccielab@groupstudy.com>
Cc: <ciscostudent1@yahoo.com.br>
Sent: Thursday, November 27, 2003 10:58 AM
Subject: Re: radius callback
> This is my working configuration for radius callback:
> ===========================================
> ============= callback client =============
> ===========================================
> R4#
> !
> version 12.2
> !
> hostname R4
> !
> username R2 password 0 cisco
> !
> isdn switch-type basic-ni
> !
> interface BRI0/0
> ip address 172.16.1.2 255.255.255.252
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> dialer idle-timeout 20
> dialer map ip 172.16.1.1 name R2 broadcast 5551000
> dialer load-threshold 1 either
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 21255520000101 5552000
> isdn spid2 21255520010101 5552001
> no cdp enable
> no cdp enable
> ppp callback request
> ppp authentication chap callback
> ppp multilink
> !
> dialer-list 1 protocol ip permit
> !
> end
> ===========================================
> ============= callback server =============
> ===========================================
> R2#
> !
> version 12.2
> !
> hostname R2
> !
> aaa new-model
> !
> !
> aaa authentication ppp default group radius
> aaa authorization network default group radius
> !
> isdn switch-type basic-ni
> !
> interface BRI0/0
> ip address 172.16.1.1 255.255.255.252
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> dialer idle-timeout 20
> dialer enable-timeout 2
> dialer load-threshold 1 either
> dialer callback-secure
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 21255510000101 5551000
> isdn spid2 21255510010101 5551001
> no cdp enable
> ppp callback accept
> ppp authentication chap callin
> ppp multilink
> !
> dialer-list 1 protocol ip permit
> !
> radius-server host 10.1.1.11 key cisco
> !
> end
> R2#
> ===========================
> On the CSACS server I have the following selected under Group:
>
> Cisco IOS/PIX RADIUS Attributes
> [check] [009\001] cisco-av-pair
>
> IETF RADIUS Attributes
> lcp:callback-dialstring=5552000
> [check] [006] Service-Type
> Framed
> [check] [007] Framed-Protocol
> PPP
>
> All the other options are unchecked and I have Authenticate
> Using RADIUS (Cisco IOS/PIX) under Network Configuration.
>
> HTH,
>
> Phil
>
>
> Zalimas Azaaaz <zalzal50@yahoo.gr> wrote:
> Hi,
> I am trying to configure my radius server (ACS) to provide the
> isdn callback string to the router.
>
> I receive the following:
>
> cisco AVPair "lcp:callback-dialstring=384800" not applied for
> multilink
> cisco AVPair "lcp:callback-dialstring=384800" not applied for ip
>
> is this normal? Have I forgot something ?
>
> the isdn link is established/authenticated but no calllback.
>
> Help,
> Zal
>
>
>
> ---------------------------------
> Do You Yahoo!?
> Apojt^ste tgm dyqe\m sar@yahoo.gr die}humsg sto Yahoo! Mail.
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study
> materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
>
> Yahoo! Mail: 6MB, anti-spam e antivmrus gratuito! Crie sua conta agora:
> http://mail.yahoo.com.br
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3