From: Ken.Farrington@barclayscapital.com
Date: Tue Dec 09 2003 - 15:46:38 GMT-3
Guys, simple config on a 2600
When I attached the serv-pol to the fa0/0 interface it tells me to run cef
for nbar.
I thought that NBAR was only certain prots under the match protocol and not
all protocols? I am just matching FTP (pretty standard protocol - not
fancy like sql, or exchange stuff?)
Can someone confirm this is the case that the "match protocol (any
protocol)" under the class-map is starting NBAR
Many thx indeed,
Ken
!
class-map match-all kenny
match protocol ftp
!
policy-map ken
class kenny
bandwidth percent 50
!
2600-r02(config-pmap-c)#int fa0/0
2600-r02(config-if)#servic
2600-r02(config-if)#service-policy out ken
CEF switching is required for NBAR 'match protocol' command
2600-r02(config-if)#^Z
2600-r02#
________________________________________________________________
Ken Farrington
Global Networks, Barclays Capital, 5 The North Colonnade, Canary
Wharf, London, E14 4BB
* Tel : 020 7773 3550
* Mob : 07768-866655
* ken.farrington@barcap.com
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:38 GMT-3