From: ccie (ccie@tisolutions.biz)
Date: Wed May 05 2004 - 04:12:24 GMT-3
so is it a bug? the 3com are using 802.1q so it should work...
any ideas would be appreciated
tia
-----Original Message-----
From: Richard Dumoulin [mailto:richard.dumoulin@vanco.es]
Sent: 04 May 2004 17:30
To: McCallum, Robert; ccie; ccielab@groupstudy.com
Subject: RE: Vlan issue
Well, encapsulation failure only means that ARP was not
successfull.
-----Original Message-----
From: McCallum, Robert [mailto:robert.mccallum@thus.net]
Sent: martes, 04 de mayo de 2004 18:24
To: Richard Dumoulin; ccie; ccielab@groupstudy.com
Subject: RE: Vlan issue
When you do the ping do a debug ip pack detail. If you see
encaps failures ta da as Richard says below.
Robert McCallum
CCIE #8757 R&S
01415663448
07818002241
> -----Original Message-----
> From: Richard Dumoulin [mailto:richard.dumoulin@vanco.es]
> Sent: 04 May 2004 16:32
> To: ccie; ccielab@groupstudy.com
> Subject: RE: Vlan issue
>
>
> An interface fastethernet controller bugg on your 2600 ? Is
> your 3Com negociating the trunk or not ?
>
> --Richard
>
> -----Original Message-----
> From: ccie [mailto:ccie@tisolutions.biz]
> Sent: martes, 04 de mayo de 2004 17:15
> To: ccielab@groupstudy.com
> Subject: OT: Vlan issue
>
>
> Hi
>
> This is the situation:
>
> I have a 3com 4400 switch with 2 vlan (data and voice)
> connecting to a single fast ethernet port on a 2600 router.
> I have created sub interfaces with 802.1q encaps. First sub
> is in vlan 1 native and the second sub is in vlan 2 non
> native. When I ping a device in vlan 2 i get and incomplete
> arp entry. Any ideas why....
>
> I have tried adjusting the arp timeout and using extended
> pings with a longer time between packets with no success.
>
> Thanks
>
> Ben
>
>
> ________________________________________________
> This email is confidential, may be legally privileged and is
> for the intended recipient only. Access, disclosure, copying,
> distribution or reliance on any information it contains is
> prohibited and may be a criminal offence. Please delete if
> received in error and email confirmation to sender.
>
> Please note that any views expressed in this message are
> those of the individual sender, except where the sender
> specifically states them to be the views of tisolutions ltd.
> ________________________________________________
>
> ______________________________________________________________
> _________
> Please help support GroupStudy by purchasing your study
> materials from: http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________
> _________
> Please help support GroupStudy by purchasing your study
> materials from: http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:04 GMT-3