From: Yasser Abdullah (yasser@alharbitelecom.com)
Date: Sun May 23 2004 - 18:16:00 GMT-3
You need the rotary command + the port number. So if you type in: rotary
3067, you'll just be able to telnet to port 3067 (in addition to port 23).
I don't think you can telnet to port 3000 since the rotary command accept
values from 1 to 99. So it 3001 to 3099.
Brgds,
Yasser
-----Original Message-----
From: "Sergio Jimenez Arguedas" <sejimenez@its.co.cr>
To: <ccielab@groupstudy.com>
Date: Sun, 23 May 2004 14:01:00 -0600
Subject: Fw: Telnet to port 3000 !?!?!?
> Hi Richard
>
>
> Do you have "rotary x" in the line vty x?
>
>
> Rgds,
>
>
> Sergio
>
>
>
> ----- Original Message -----
> From: "Richard Dumoulin" <richard.dumoulin@vanco.es>
> To: <ccielab@groupstudy.com>
> Sent: Sunday, May 23, 2004 12:48 PM
> Subject: Telnet to port 3000 !?!?!?
>
>
> > Hi group, I cannot figure out why thew following is not working:
> telnet
> > 150.1.1.1 3067
> >
> >
> > Rack1R1#sh line
> > Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise
> Overruns
> > Int
> > * 0 CTY - - - - - 0 0
> 0/0
> > -
> > 65 AUX 9600/9600 - - - - - 0 0
> 0/0
> > -
> > 66 VTY - - - - - 0 0
> 0/0
> > -
> > 67 VTY - - - - - 0 0
> 0/0
> > -
> > 68 VTY - - - - - 0 0
> 0/0
> > -
> > 69 VTY - - - - - 0 0
> 0/0
> > -
> > 70 VTY - - - - - 0 0
> 0/0
> > -
> >
> > Line(s) not in async mode -or- with no hardware support:
> > 1-64
> >
> > Rack1R1#telnet 150.1.1.1 3067
> > Trying 150.1.1.1, 3067 ...
> > % Connection refused by remote host
> >
> > Rack1R1#
> > Rack1R1#
> > Rack1R1#sh line
> > Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise
> Overruns
> > Int
> > * 0 CTY - - - - - 0 0
> 0/0
> > -
> > 65 AUX 9600/9600 - - - - - 0 0
> 0/0
> > -
> > 66 VTY - - - - - 0 0
> 0/0
> > -
> > 67 VTY - - - - - 0 0
> 0/0
> > -
> > 68 VTY - - - - - 0 0
> 0/0
> > -
> > 69 VTY - - - - - 0 0
> 0/0
> > -
> > 70 VTY - - - - - 0 0
> 0/0
> > -
> >
> > Line(s) not in async mode -or- with no hardware support:
> > 1-64
> >
> > Rack1R1# sh run int lo 0
> > Building configuration...
> >
> > Current configuration : 63 bytes
> > !
> > interface Loopback0
> > ip address 150.1.1.1 255.255.255.0
> > end
> >
> > Rack1R1#telnet 150.1.1.1 3066
> > Trying 150.1.1.1, 3066 ...
> > % Connection refused by remote host
> >
> > Rack1R1#telnet 150.1.1.1 3000
> > Trying 150.1.1.1, 3000 ...
> > % Connection refused by remote host
> >
> >
> _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials
> from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:15 GMT-3