From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Fri Jun 04 2004 - 15:20:02 GMT-3
Is the line up ?
Zack Damen wrote:
> I am trying to get a route into eigrp which is a directly connected
> interface on the router. please look below for config, can you tell me
> what my problem is off the bat?
>
> interface Async161
> description SLIP connection
> ip address 10.139.236.61 255.255.255.252
> async dynamic routing
> async mode dedicated
>
> router eigrp 1
> passive-interface default
> network 10.0.0.0
> no auto-summary
> no eigrp log-neighbor-change
>
> router#show ip eigrp 1 topology 10.139.236.60 255.255.255.252
> % IP-EIGRP (AS 1): Route not in topology table
>
> shouldn't I c it in the topology table local to te router, but its not
> placing it in the table. I am a little lost as they say.
>
> Zack
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:32 GMT-3