From: wing_lam@jossynergy.com
Date: Wed Dec 08 2004 - 06:20:09 GMT-3
Hi Group,
I am try pinging the broadcast on a network, with only 1 device replies.
But I cannot see it's arp, why?
Router#p 10.1.255.255
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.255.255, timeout is 2 seconds:
.
Reply to request 1 from 10.1.1.40, 33 ms
Reply to request 2 from 10.1.1.40, 8 ms
Reply to request 3 from 10.1.1.40, 9 ms
Reply to request 4 from 10.1.1.40, 9 ms
Router#sh ip arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.1.0.100 - 000f.2406.7840 ARPA Vlan1
Internet 10.1.0.1 0 0008.027f.da1d ARPA Vlan1
Internet 10.1.1.1 0 000f.fe14.dc61 ARPA Vlan1
Router#sh run int vlan 1
Building configuration...
Current configuration : 60 bytes
!
interface Vlan1
ip address 10.1.0.100 255.255.0.0
end
Thanks,
BBD
DISCLAIMER:- This email is confidential and intended only for the use of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original message.
Thank you.
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:25 GMT-3