From: Jason Sinclair (jason_sinclair@pacific.net.au)
Date: Mon Apr 11 2005 - 20:30:02 GMT-3
John,
From CCO:
Usage Guidelines
The dialer load-threshold command is generally configured instead of the
ppp multilink load-threshold command, and MLP inherits the values set by
the dialer load-threshold command when a bundle configuration is taken
from a dialer interface.
Use the ppp multilink load-threshold command for dynamic bandwidth
(dial-on-demand) systems in which MLP will need to dial additional links
as needed to increase the bandwidth of a connection. When the load on
the bundle interface exceeds the set value, links are added. When the
load on the bundle interface drops below the set value, links are
dropped.
Hope this helps.
Jason Sinclair CCIE #9100
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:56 GMT-3