From: Scott Morris (swm@emanon.com)
Date: Mon Apr 11 2005 - 20:37:12 GMT-3
Personal preference in many instances.
Dialer-load will work regardless of whether you're running PPP multilink.
Multilink load-threshold will ONLY work if you have a multilink bundle.
So if you're running multilink, the effect is the same. If you want to be
sure that you bring up a second channel ONLY if you're running multilink,
then the second one is better.
If you want to do L3 load balancing, then you'll run dialer load-threshold
WITHOUT running multilink.
HTH,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Matus
Sent: Monday, April 11, 2005 7:11 PM
To: ccielab@groupstudy.com
Subject: ppp multilink w/ dialer load-threshold vs. multilink load-threshold
hi folks,
if you're running ppp multilink with both of the folliwing commands bring up
the second b-channel , or is one prefered over the other?
int bri0/0
encap ppp
ppp multilink
ppp multilink load-threshold 128
encap ppp
ppp multilink
dialer load-threshold 128
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:56 GMT-3