From: Anthony Sequeira (terry.francona@gmail.com)
Date: Mon Apr 11 2005 - 20:45:14 GMT-3
And I guess we cannot forget about the command:
ppp multilink links minimum 2
while we are at it.....
This is where the exam gets so fun - and a bit silly.
On Apr 11, 2005 7:30 PM, Jason Sinclair <jason_sinclair@pacific.net.au> wrote:
> John,
>
> From CCO:
>
> Usage Guidelines
> The dialer load-threshold command is generally configured instead of the
> ppp multilink load-threshold command, and MLP inherits the values set by
> the dialer load-threshold command when a bundle configuration is taken
> from a dialer interface.
>
> Use the ppp multilink load-threshold command for dynamic bandwidth
> (dial-on-demand) systems in which MLP will need to dial additional links
> as needed to increase the bandwidth of a connection. When the load on
> the bundle interface exceeds the set value, links are added. When the
> load on the bundle interface drops below the set value, links are
> dropped.
>
> Hope this helps.
>
> Jason Sinclair CCIE #9100
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:56 GMT-3