From: boby2kusa (boby2kusa@hotmail.com)
Date: Mon Apr 25 2005 - 13:26:38 GMT-3
I'm not sure what you are asking the group here.
But the "dot1x port-control auto" is an interface command that enables IEEE
802.1x authentication on the interface.
aaa authentication dot1x default group radius >> with teh keyword "default"
keyword followed by the method that is to be used in default situations. The
default method list is automatically applied to all ports. So, do not use
the "default" keyword, it's optional, meaning you do not have to put it in.
---- Original Message -----
From: "Bart Van Kildonck" <bartvankildonck@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Saturday, April 23, 2005 8:01 AM
Subject: Dot1x authentication on Cat3550
> Hi,
>
> I've a question about dot1x on a cat 3550
>
> All the examples I see are always using the default dot1x authentication
group:
>
> aaa authentication dot1x default group radius
> int fas x/x
> dot1x port-con auto
>
> Is it also possible to use a non-default name on a cat3550, or is only
> the default group assigned to the fastethernet interfaces? This way it
> won't be applied to all lines automatically I think and you're not
> locking yourself out.
>
> aaa authentication dot1x ccielab group radius
> int fas x/x
> dot1x port-con auto
>
> rgds,
> bvk
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:08 GMT-3