Dialer Watch and Dialer-group

From: gladston@br.ibm.com
Date: Fri Jun 03 2005 - 11:54:47 GMT-3


Hi,

Cisco Doc UniverCD and Solie's book brings examples using Dialer Watch with dialer-group.
But the same Cisco Doc says:

"Once the secondary link is up, at the expiration of each idle timeout,
the primary link is rechecked"
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113t/113t_2/dwatch.htm#xtocid1516510

Tests shows it is not necessary to use dialer-group.

Is there another reason to use diaeler-group in this case?

I am using dialer idle-timeout 0 on the remote router.
idle-timeout on local router is reset while the primary link is down by Dialer Watch.

r5#sh run int di 25
Building configuration...

Current configuration : 310 bytes
!
interface Dialer25
 ip address 172.16.25.5 255.255.255.0
 encapsulation ppp
 dialer pool 25
 dialer remote-name r2
 dialer idle-timeout 60
 dialer string 8358663
 dialer string 8358661
 dialer load-threshold 1 outbound
 dialer watch-group 5
 ppp callback request
 ppp authentication chap
 ppp multilink
end

r5(config)#int di 25
r5(config-if)#no dialer-group 1
r5(config-if)#

r7(config-if)#int e 0/1
r7(config-if)#sh

*Mar 1 02:41:31.871: destroy peer: 172.16.57.7
*Mar 1 02:41:31.879: DDR: Dialer Watch: watch-group = 5
*Mar 1 02:41:31.879: DDR: network 172.16.77.0/255.255.255.0 DOWN,
*Mar 1 02:41:31.879: DDR: network 172.16.2.1/255.255.255.255 DOWN,
*Mar 1 02:41:31.879: DDR: primary DOWN
*Mar 1 02:41:31.883: DDR: Dialer Watch: Dial Reason: Primary of group 5 DOWN
*Mar 1 02:41:31.883: DDR: Dialer Watch: watch-group = 5,
*Mar 1 02:41:31.883: BR0/0 DDR: rotor dialout [best] least recent failure is also most
 recent failure
*Mar 1 02:41:31.883: BR0/0 DDR: rotor dialout [best] trying untried dialout
*Mar 1 02:41:31.883: BR0/0 DDR: rotor dialout [best] also has most recent failure
*Mar 1 02:41:31.883: BR0/0 DDR: rotor dialout [best]
*Mar 1 02:41:31.883: DDR: dialing secondary by dialer string 8358663 on Di25
*Mar 1 02:41:31.883: BR0/0 DDR: Attem
r5#pting to dial 8358663
*Mar 1 02:41:31.887: DDR: Dialer Watch: watch-group = 5
*Mar 1 02:41:31.887: DDR: network 172.16.77.0/255.255.255.0 DOWN,
*Mar 1 02:41:31.887: DDR: network 172.16.2.1/255.255.255.255 DOWN,
*Mar 1 02:41:31.887: DDR: primary DOWN
*Mar 1 02:41:31.887: DDR: Dialer Watch: Dial Reason: Primary of group 5 DOWN
*Mar 1 02:41:31.891: DDR: Dialer Watch: watch-group = 5,
*Mar 1 02:41:31.891: DDR: Dialer Watch: watch-group = 5
*Mar 1 02:41:31.891: DDR: network 172.16.77.0/255.255.255.0 DOWN,
*Mar 1 02:41:31.891: DDR: network 172.16.2.1/255.255.255.255 DOWN,
*Mar 1 02:41:31.891: DDR: primary DOWN
*Mar 1 02:41:31.891: DDR: Dialer Watch: Dial Reason: Primary of group 5 DOWN
*Mar 1 02:41:31.891: DDR: Dialer Watch: watch-group = 5,
*Mar 1 02:41:31.895: DDR: Dialer Watch: watch-group = 5
*Mar 1 02:41:31.895: DDR: network 172.16.77.0/255.255.255.0 DOWN,
*Mar 1 02:41:31.895: DDR: network 172.16.2.1/255.255.255.255 DOWN,
*Mar 1 02:41:31.895: DDR: primary DOWN
*Mar 1 02:41:31.895: DDR: Dialer Watch: Dial Reason: Primary of group 5 DOWN
*Mar 1 02:41:31.895: DDR: Dialer Watch: watch-group = 5,
*Mar 1 02:41:32.228: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
*Mar 1 02:41:32.232: BR0/0:1 DDR: Dialer Watch: resetting call in progress
*Mar 1 02:41:32.232: BR0/0:1: interface must be fifo queue, force fifo
*Mar 1 02:41:32.236: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di25
*Mar 1 02:41:32.304: BR0/0:1 DDR: Remote name for r2
*Mar 1 02:41:32.308: BR0/0:1 DDR: Callback negotiated - Disconnecting
*Mar 1 02:41:32.308: DDR: Callback client for r2 8358663 created
*Mar 1 02:41:33.309: BR0/0:1 DDR: disconnecting call
*Mar 1 02:41:33.309: BR0/0:1 DDR: Dialer Watch: resetting call in progress
*Mar 1 02:41:33.309: DDR: Dialer Watch: watch-group = 5
*Mar 1 02:41:33.309: DDR: network 172.16.77.0/255.255.255.0 DOWN,
*Mar 1 02:41:33.309: DDR: network 172.16.2.1/255.255.255.255 DOWN,
*Mar 1 02:41:33.309: DDR: primary DOWN
*Mar 1 02:41:33.309: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed
 state to up
*Mar 1 02:41:33.313: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 8358663 r
2
*Mar 1 02:41:33.317: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 8358663
 r2, call lasted 1 seconds
*Mar 1 02:41:33.410: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down
*Mar 1 02:41:33.414: BR0/0 DDR: has total 0 call(s), dial_out 0, dial_in 0
*Mar 1 02:41:33.414: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di25
*Mar 1 02:41:33.422: BR0/0:1 DDR: disconnecting call
*Mar 1 02:41:34.411: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed
 state to down

r5#sh is ac
--------------------------------------------------------------------------------
                                ISDN ACTIVE CALLS
--------------------------------------------------------------------------------
Call Calling Called Remote Seconds Seconds Seconds Charges
Type Number Number Name Used Left Idle Units/Currency
--------------------------------------------------------------------------------
In 8358663 8358662 r2 22 Unavail -
--------------------------------------------------------------------------------

r5#



This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3