From: James Gwede (ccie@webmail.co.za)
Date: Fri Jun 03 2005 - 11:58:38 GMT-3
On Fri, 3 Jun 2005 10:52:36 -0400
 "Cisco certification" <ccielab@groupstudy.com> wrote:
> Hi,
> 
> You have tried to post to a GroupStudy.com certification
> mailing list. Because
> the server does not recognize you as a confirmed poster,
> you will be required
> to authenticate that you are using a valid e-mail address
> and are not a
> spammer. By confirming this e-mail you certify that you
> are not sending
> Unsolicited Bulk Email (UBE).  
> 
> PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN!  BY
> CONFIRMING THIS EMAIL
> YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER)
> WILL BE POSTED.
> 
> 
> By confirming this e-mail you also certify the following:
> 
> 1. The message does NOT break Cisco's Non-Disclosure
> requirements.
> 
> 2. The message is NOT designed to advertise a commercial
> product.
> 
> 3. You understand all postings become property of
> GroupStudy.com
> 
> 4. You have searched the archives prior to posting.
> 
> 5. The message is NOT inflammatory.
> 
> 6. The message is NOT a test message.
> 
> To confirm, simply reply to this message.  No editing is
> necessary.  Once
> confirmed, you will be able to post without additional
> confirmations.
> 
> 
> Welcome to GroupStudy.com!
> 
> 
> First time posters to GroupStudy.com are required to
> agree to the GroupStudy terms and conditions.
> Replying to this email, certifies you have read and agree
> to the GroupStudy posting guidelines and terms and
> conditions.
> 
> --- Original Message Follows ---
> 
> From: "James Gwede" <ccie@webmail.co.za>
> Subject: 2 different ATM VPI/VCI
> To: ccielab@groupstudy.com
> Date: Fri, 03 Jun 2005 16:52:28 +0200
> 
> Hi all, is it possible to have two ATM PVCs on the same
> IP
> subnet? eg., R1 pvc 0/100 (10.10.10.1/30)and R2 pvc 1/101
> (10.10.10.2/30). Will this work? I've tried to no avail
> unless I configure the same VPI/VCI pairs on both ends of
> the PVC. You help will be appreciated. 
>
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3