ATM Back to back configuration on 1401 Routers

From: sergehh@hotmail.com
Date: Thu Jun 16 2005 - 21:59:23 GMT-3

• Next message: marvin greenlee: "RE: ATM Back to back configuration on 1401 Routers"
• Previous message: Richard Gallagher: "RE: OSPF Support for MPLS VPN"
• Next in thread: marvin greenlee: "RE: ATM Back to back configuration on 1401 Routers"
• Maybe reply: marvin greenlee: "RE: ATM Back to back configuration on 1401 Routers"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

 I need some help in configuring a back to back atm, on 1401 routers
 I have connected a crossover cat5 to both ends of the atm0 and configuerd
 using the following steps, lines keep going up and down.tried encap aal5snap.
 any solutions will be greatley appreciated.

Thanks

 
R1
  interface ATM0
 ip address 192.1.1.1 255.255.255.0
 no ip directed-broadcast
 atm vc-per-vp 4096
 no atm ilmi-keepalive
 pvc 0/101
  protocol ip 192.1.1.2 broadcast
  
 R2
interface ATM0
 ip address 192.1.1.2 255.255.255.0
 no ip directed-broadcast
 atm vc-per-vp 4096
 no atm ilmi-keepalive
 pvc 0/102
  protocol ip 192.1.1.1 broadcast

• Next message: marvin greenlee: "RE: ATM Back to back configuration on 1401 Routers"
• Previous message: Richard Gallagher: "RE: OSPF Support for MPLS VPN"
• Next in thread: marvin greenlee: "RE: ATM Back to back configuration on 1401 Routers"
• Maybe reply: marvin greenlee: "RE: ATM Back to back configuration on 1401 Routers"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3