From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu Jul 21 2005 - 17:27:15 GMT-3
Configuring a Terminal/Comm Server
http://www.cisco.com/warp/public/793/access_dial/comm_server.html
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Matus
Sent: Thursday, July 21, 2005 1:13 PM
To: ccielab@groupstudy.com
Subject: termal server revese telnet config
i'm helping a bud here at work set up a termial server to remote into
his
other routers. he has a 2511 with 16 async ports, the serial to rj45
type
(2 serial connections on the 2511) so he has the octal cables. i'm
assuming
that the octal cables go into the console ports. other than that, what
is
needed on the 2511 to telnet into the other routers. i know you need:
ip host r1 2001 1.1.1.1 <----------- is the address arbitrary?
do you confgure the following on the line console or line?
line con 0
or
line 1 16?
tarnsport output(input?) all
modem inout
where does this go?
TIA
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3