From: John Matus (john_matus@hotmail.com)
Date: Thu Jul 21 2005 - 17:39:05 GMT-3
ahhhhhhhhhhh. that's the piece of info i needed...works great now!!! ;)
>From: marvin greenlee <marvin@ccbootcamp.com>
>Reply-To: marvin greenlee <marvin@ccbootcamp.com>
>To: "'John Matus'" <john_matus@hotmail.com>, ccielab@groupstudy.com
>Subject: RE: termal server revese telnet config [bcc][faked-from]
>Date: Thu, 21 Jul 2005 13:30:37 -0700
>
>Should have been more clear. Needs to match an address locally on the term
>server.
>
>Marvin Greenlee, CCIE#12237, CCSI# 30483
>Network Learning Inc
>marvin@ccbootcamp.com
>www.ccbootcamp.com (Cisco Training)
>
>
>-----Original Message-----
>From: John Matus [mailto:john_matus@hotmail.com]
>Sent: Thursday, July 21, 2005 1:24 PM
>To: marvin greenlee; ccielab@groupstudy.com
>Subject: RE: termal server revese telnet config [bcc][faked-from]
>
>ok, i don't understand the ip address part of this. take for example the
>racks that you rent online. when you log into the terminal server you do a
>reverse telnet into say R1. R1 has a completely blank configuration (i
>believe), so how can you assign the ip address of the ethernet interface or
>the loopback interface.....and why would you assign this when you are
>initiating the session through the async ports where (i would think) ip
>addresses have no meaning?? :-0
>
> >From: marvin greenlee <marvin@ccbootcamp.com>
> >To: 'John Matus' <john_matus@hotmail.com>, ccielab@groupstudy.com
> >Subject: RE: termal server revese telnet config [bcc][faked-from]
> >Date: Thu, 21 Jul 2005 13:23:44 -0700
> >
> >The address needs to match a local address on the router (usually 1.1.1.1
> >is
> >added as a loopback.)
> >
> >The other parts are configured under the line 1 16. You may also want to
> >include things such as exec timeouts for the lines.
> >
> >Marvin Greenlee, CCIE#12237, CCSI# 30483
> >Network Learning Inc
> >marvin@ccbootcamp.com
> >www.ccbootcamp.com (Cisco Training)
> >
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >John
> >Matus
> >Sent: Thursday, July 21, 2005 1:13 PM
> >To: ccielab@groupstudy.com
> >Subject: termal server revese telnet config [bcc][faked-from]
> >Importance: Low
> >
> >i'm helping a bud here at work set up a termial server to remote into his
> >other routers. he has a 2511 with 16 async ports, the serial to rj45
>type
> >(2 serial connections on the 2511) so he has the octal cables. i'm
> >assuming
> >
> >that the octal cables go into the console ports. other than that, what
>is
> >needed on the 2511 to telnet into the other routers. i know you need:
> >
> >ip host r1 2001 1.1.1.1 <----------- is the address arbitrary?
> >
> >do you confgure the following on the line console or line?
> >line con 0
> >or
> >line 1 16?
> >
> >tarnsport output(input?) all
> >modem inout
> >
> >where does this go?
> >
> >TIA
> >
> >_________________________________________________________________
> >Dont just search. Find. Check out the new MSN Search!
> >http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today - it's FREE!
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3