From: Chris Atkins (chris_atkins@blueyonder.co.uk)
Date: Mon Jan 09 2006 - 18:24:05 GMT-3
Looks like it is.
Cheers
Chris
----- Original Message -----
From: CCIEin2006
To: Chris Atkins
Cc: Cisco certification
Sent: Monday, January 09, 2006 9:22 PM
Subject: Re: VTP commands not shown in config on Cat3550?
Yes I am in normal config mode. Maybe its the IOS version?
On 1/9/06, Chris Atkins <chris_atkins@blueyonder.co.uk> wrote:
were you in Vlan database mode if so try in normal conf t mode, works
for
me.
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Lab_S2
!
enable secret level 2 5 $1$UgGy$QvUo5y1FIDYCMJI3BisPj0
!
!
vlan 10
!
vlan 20
!
vlan 30
!
vlan 40
!
vlan 50
!
vlan 990
remote-span
ip subnet-zero
ip tcp synwait-time 5
no ip domain-lookup
!
vtp domain ccie
vtp mode transparent
mls qos
Cheers
Chris
----- Original Message -----
From: "CCIEin2006" <ciscocciein2006@gmail.com>
To: "Cisco certification" < ccielab@groupstudy.com>
Sent: Monday, January 09, 2006 9:01 PM
Subject: VTP commands not shown in config on Cat3550?
> Is there a reason why vtp configurations don't show up in the config?
>
>
> Rack1SW1#sh run
> Building configuration...
>
> Current configuration : 2815 bytes
> !
> version 12.2
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname Rack1SW1
> !
> enable password cisco
> !
> no aaa new-model
> ip subnet-zero
> ip routing
> no ip domain-lookup
> !
> !
> !
> !
> !
> !
> no file verify auto
> !
> spanning-tree mode pvst
> spanning-tree extend system-id
> spanning-tree vlan 16 priority 24576
> !
> vlan internal allocation policy ascending
> !
> !
> interface Loopback0
> ip address 150.1.7.7 255.255.255.0
> !
> interface GigabitEthernet0/1
> switchport access vlan 16
> !
> interface GigabitEthernet0/2
> switchport access vlan 2
> !
> interface GigabitEthernet0/3
> switchport access vlan 3
> !
> interface GigabitEthernet0/4
> switchport access vlan 4
> !
> interface GigabitEthernet0/5
> switchport access vlan 52
> !
> interface GigabitEthernet0/6
> switchport trunk encapsulation dot1q
> switchport trunk allowed vlan 16,36
> switchport mode trunk
> !
> interface GigabitEthernet0/7
> !
> interface GigabitEthernet0/8
> !
> interface GigabitEthernet0/9
> !
> interface GigabitEthernet0/10
> !
> interface GigabitEthernet0/11
> !
> interface GigabitEthernet0/12
> !
> interface GigabitEthernet0/13
> switchport trunk encapsulation isl
> switchport mode dynamic desirable
> !
> interface GigabitEthernet0/14
> switchport trunk encapsulation isl
> switchport mode dynamic desirable
> spanning-tree vlan 16 port-priority 112
> !
> interface GigabitEthernet0/15
> switchport trunk encapsulation isl
> switchport mode dynamic desirable
> spanning-tree vlan 16 port-priority 96
> !
> interface GigabitEthernet0/16
> !
> interface GigabitEthernet0/17
> !
> interface GigabitEthernet0/18
> !
> interface GigabitEthernet0/19
> !
> interface GigabitEthernet0/20
> !
> interface GigabitEthernet0/21
> !
> interface GigabitEthernet0/22
> !
> interface GigabitEthernet0/23
> !
> interface GigabitEthernet0/24
> switchport access vlan 63
> !
> interface GigabitEthernet0/25
> !
> interface GigabitEthernet0/26
> !
> interface GigabitEthernet0/27
> !
> interface GigabitEthernet0/28
> !
> interface Vlan1
> no ip address
> shutdown
> !
> interface Vlan7
> ip address 136.1.7.7 255.255.255.0
> !
> interface Vlan57
> ip address 136.1.57.7 255.255.255.0
> !
> router rip
> version 2
> network 136.1.0.0
> network 150.1.0.0
> no auto-summary
> !
> router bgp 200
> no synchronization
> bgp router-id 150.1.7.7
> bgp log-neighbor-changes
> neighbor 136.1.57.5 remote-as 200
> no auto-summary
> !
> ip classless
> ip http server
> ip http secure-server
> !
> !
> ip access-list standard CISCORO
> ip access-list standard CISCORW
> !
> snmp-server community RO RO CISCORO
> snmp-server community RW RO CISCORW
> snmp-server location San Jose, CA US
> snmp-server contact CCIE Lab SW1
> snmp-server chassis-id 221-787878
> snmp-server enable traps vtp
> snmp-server host 136.1.2.100 CISCOTRAP vtp
> !
> control-plane
> !
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> line vty 0 4
> password cisco
> login
> line vty 5 15
> password cisco
> login
> !
> !
> end
>
> Rack1SW1#
> Rack1SW1#
> Rack1SW1#show vtp status
> VTP Version : 2
> Configuration Revision : 0
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 15
> VTP Operating Mode : Server
> VTP Domain Name : IELAB
> VTP Pruning Mode : Enabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Enabled
> MD5 digest : 0xAE 0x7B 0xFD 0x55 0x53 0x5B 0x5B
0x5E
> Configuration last modified by 136.1.7.7 at 3-1-93 01:36:15
> Local updater ID is 136.1.7.7 on interface Vl7 (lowest numbered VLAN
> interface found)
> Rack1SW1#
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3