From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Jan 09 2006 - 18:45:26 GMT-3
It only shows up in the config if you're in VTP transparent mode.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com 
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Chris Atkins
> Sent: Monday, January 09, 2006 3:24 PM
> To: CCIEin2006
> Cc: Cisco certification
> Subject: Re: VTP commands not shown in config on Cat3550?
> 
> Looks like it is.
> 
> Cheers
> 
> Chris
>   ----- Original Message -----
>   From: CCIEin2006
>   To: Chris Atkins
>   Cc: Cisco certification
>   Sent: Monday, January 09, 2006 9:22 PM
>   Subject: Re: VTP commands not shown in config on Cat3550?
> 
> 
>   Yes I am in normal config mode. Maybe its the IOS version?
> 
> 
>   On 1/9/06, Chris Atkins <chris_atkins@blueyonder.co.uk> wrote:
>     were you in Vlan database mode if so try in normal conf  t mode,
works
> for
>     me.
> 
>     version 12.1
>     no service single-slot-reload-enable
>     no service pad
>     service timestamps debug uptime
>     service timestamps log uptime
>     no service password-encryption
>     !
>     hostname Lab_S2
>     !
>     enable secret level 2 5 $1$UgGy$QvUo5y1FIDYCMJI3BisPj0
>     !
>     !
>     vlan 10
>     !
>     vlan 20
>     !
>     vlan 30
>     !
>     vlan 40
>     !
>     vlan 50
>     !
>     vlan 990
>     remote-span
>     ip subnet-zero
>     ip tcp synwait-time 5
>     no ip domain-lookup
>     !
>     vtp domain ccie
>     vtp mode transparent
>     mls qos
> 
> 
>     Cheers
> 
>     Chris
>     ----- Original Message -----
>     From: "CCIEin2006" <ciscocciein2006@gmail.com>
>     To: "Cisco certification" < ccielab@groupstudy.com>
>     Sent: Monday, January 09, 2006 9:01 PM
>     Subject: VTP commands not shown in config on Cat3550?
> 
> 
>     > Is there a reason why vtp configurations don't show up in the
> config?
>     >
>     >
>     > Rack1SW1#sh run
>     > Building configuration...
>     >
>     > Current configuration : 2815 bytes
>     > !
>     > version 12.2
>     > no service pad
>     > service timestamps debug uptime
>     > service timestamps log uptime
>     > no service password-encryption
>     > !
>     > hostname Rack1SW1
>     > !
>     > enable password cisco
>     > !
>     > no aaa new-model
>     > ip subnet-zero
>     > ip routing
>     > no ip domain-lookup
>     > !
>     > !
>     > !
>     > !
>     > !
>     > !
>     > no file verify auto
>     > !
>     > spanning-tree mode pvst
>     > spanning-tree extend system-id
>     > spanning-tree vlan 16 priority 24576
>     > !
>     > vlan internal allocation policy ascending
>     > !
>     > !
>     > interface Loopback0
>     >  ip address 150.1.7.7 255.255.255.0
>     > !
>     > interface GigabitEthernet0/1
>     >  switchport access vlan 16
>     > !
>     > interface GigabitEthernet0/2
>     >  switchport access vlan 2
>     > !
>     > interface GigabitEthernet0/3
>     >  switchport access vlan 3
>     > !
>     > interface GigabitEthernet0/4
>     >  switchport access vlan 4
>     > !
>     > interface GigabitEthernet0/5
>     >  switchport access vlan 52
>     > !
>     > interface GigabitEthernet0/6
>     >  switchport trunk encapsulation dot1q
>     >  switchport trunk allowed vlan 16,36
>     >  switchport mode trunk
>     > !
>     > interface GigabitEthernet0/7
>     > !
>     > interface GigabitEthernet0/8
>     > !
>     > interface GigabitEthernet0/9
>     > !
>     > interface GigabitEthernet0/10
>     > !
>     > interface GigabitEthernet0/11
>     > !
>     > interface GigabitEthernet0/12
>     > !
>     > interface GigabitEthernet0/13
>     >  switchport trunk encapsulation isl
>     >  switchport mode dynamic desirable
>     > !
>     > interface GigabitEthernet0/14
>     >  switchport trunk encapsulation isl
>     >  switchport mode dynamic desirable
>     >  spanning-tree vlan 16 port-priority 112
>     > !
>     > interface GigabitEthernet0/15
>     >  switchport trunk encapsulation isl
>     >  switchport mode dynamic desirable
>     >  spanning-tree vlan 16 port-priority 96
>     > !
>     > interface GigabitEthernet0/16
>     > !
>     > interface GigabitEthernet0/17
>     > !
>     > interface GigabitEthernet0/18
>     > !
>     > interface GigabitEthernet0/19
>     > !
>     > interface GigabitEthernet0/20
>     > !
>     > interface GigabitEthernet0/21
>     > !
>     > interface GigabitEthernet0/22
>     > !
>     > interface GigabitEthernet0/23
>     > !
>     > interface GigabitEthernet0/24
>     >  switchport access vlan 63
>     > !
>     > interface GigabitEthernet0/25
>     > !
>     > interface GigabitEthernet0/26
>     > !
>     > interface GigabitEthernet0/27
>     > !
>     > interface GigabitEthernet0/28
>     > !
>     > interface Vlan1
>     >  no ip address
>     >  shutdown
>     > !
>     > interface Vlan7
>     >  ip address 136.1.7.7 255.255.255.0
>     > !
>     > interface Vlan57
>     >  ip address 136.1.57.7 255.255.255.0
>     > !
>     > router rip
>     >  version 2
>     >  network 136.1.0.0
>     >  network 150.1.0.0
>     >  no auto-summary
>     > !
>     > router bgp 200
>     >  no synchronization
>     >  bgp router-id 150.1.7.7
>     >  bgp log-neighbor-changes
>     >  neighbor 136.1.57.5 remote-as 200
>     >  no auto-summary
>     > !
>     > ip classless
>     > ip http server
>     > ip http secure-server
>     > !
>     > !
>     > ip access-list standard CISCORO
>     > ip access-list standard CISCORW
>     > !
>     > snmp-server community RO RO CISCORO
>     > snmp-server community RW RO CISCORW
>     > snmp-server location San Jose, CA US
>     > snmp-server contact CCIE Lab SW1
>     > snmp-server chassis-id 221-787878
>     > snmp-server enable traps vtp
>     > snmp-server host 136.1.2.100 CISCOTRAP  vtp
>     > !
>     > control-plane
>     > !
>     > !
>     > line con 0
>     >  exec-timeout 0 0
>     >  privilege level 15
>     >  logging synchronous
>     > line vty 0 4
>     >  password cisco
>     >  login
>     > line vty 5 15
>     >  password cisco
>     >  login
>     > !
>     > !
>     > end
>     >
>     > Rack1SW1#
>     > Rack1SW1#
>     > Rack1SW1#show vtp status
>     > VTP Version                     : 2
>     > Configuration Revision          : 0
>     > Maximum VLANs supported locally : 1005
>     > Number of existing VLANs        : 15
>     > VTP Operating Mode              : Server
>     > VTP Domain Name                 : IELAB
>     > VTP Pruning Mode                : Enabled
>     > VTP V2 Mode                     : Disabled
>     > VTP Traps Generation            : Enabled
>     > MD5 digest                      : 0xAE 0x7B 0xFD 0x55 0x53 0x5B
0x5B
> 0x5E
>     > Configuration last modified by 136.1.7.7 at 3-1-93 01:36:15
>     > Local updater ID is 136.1.7.7 on interface Vl7 (lowest numbered
VLAN
>     > interface found)
>     > Rack1SW1#
>     >
>     >
>
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3