From: NOUR Rabii (nour.rabii@marocconnect.com)
Date: Thu Mar 02 2006 - 11:24:29 GMT-3
Hi,
Try This configuration:
card type e1 1 1
voice call carrier capacity active
controller E1 1/0
framing NO-CRC4
pri-group timeslots 1-16
interface Serial1/0:15
no ip address
no logging event link-status
isdn switch-type primary-qsig
isdn incoming-voice modem
isdn guard-timer 3000
isdn T203 30000
isdn T310 60000
no cdp enable
voice-port 1/0:15
cptone FR
!
E1 1/0 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20030723, FPGA: 255
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
Regadrs,
Rabii NOUR
Maroc Connect
-----Message d'origine-----
De : nobody@groupstudy.com [mailto:nobody@groupstudy.com] De la part de amir
cohen
Envoyi : jeudi 2 mars 2006 12:14
@ : FORUM
Objet : Controller E1 to PBX not working
Hi Guys,
I have a strange problem with a Voice Controller E1 in
a 3725 router.
The problem is when i am creating the PRI time slots i
am getting the d-channel as follow:
controller E1 1/0
pri-group timeslots 1-31
!
interface Serial1/0:15
no ip address
encapsulation hdlc =======> Why????????
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
end
======
this is the cards that i have on the router:
High Density Voice NM-HDV2-2T1/E1 Port adapter
With 2 E1/T1 cards on board the above NM.
==============================
Rouer IOS version:
slot0:c3725-ipvoicek9-mz.124-4.T.bin
Please help me to get the Encaplsulation HDLC off,
And to activate the COnntroller with the PBX
Thank You
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:37 GMT-3