From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Mon Mar 20 2006 - 19:49:36 GMT-3
Try with the neighbor command
John Matus escribis:
> oops, i forgot the broadcast after i reconfigured the inteface.....they are
> there now but still does not form adj's.....
>
>
> Regards,
>
> John D. Matus
> Technical Support / PAS
> Fujitsu Consulting
> 626-568-7716
> John.Matus@tokiom.com
>
>
>                                                                            
>              "Ed Lui"                                                      
>              <edwlui@gmail.com                                             
>              >                                                          To 
>                                        "John Matus"                        
>              03/20/2006 02:13          <John.Matus@tokiom.com>             
>              PM                                                         cc 
>                                        "Joshua Lauer"                      
>                                        <jslauer@hotmail.com>,              
>                                        ccielab@groupstudy.com              
>                                                                    Subject 
>                                        Re: dumb eigrp adj question         
>                                                                            
>                                                                            
>                                                                            
>                                                                            
>                                                                            
>                                                                            
>
>
>
>
> John,
>
> What about add the broadcast statement to the hub router ?
>
> Edward
>
> On 3/20/06, John Matus <John.Matus@tokiom.com> wrote:
>   
>> opps..........wrong R3 config
>> interface Serial0/0
>>  ip address 183.1.123.3 255.255.255.0
>>  encapsulation frame-relay
>>  clockrate 2000000
>>  frame-relay map ip 183.1.123.1 302
>>  frame-relay map ip 183.1.123.2 302
>>  no frame-relay inverse-arp
>>  frame-relay lmi-type cisco
>>
>>
>> Regards,
>>
>> John D. Matus
>> Technical Support / PAS
>> Fujitsu Consulting
>> 626-568-7716
>> John.Matus@tokiom.com
>>
>>
>>
>>             "Joshua Lauer"
>>             <jslauer@hotmail.
>>             com>                                                       To
>>                                       "John Matus"
>>             03/20/2006 02:01          <John.Matus@tokiom.com>
>>             PM                                                         cc
>>
>>                                                                   Subject
>>                                       Re: dumb eigrp adj question
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> John,
>>
>> Check out your IP address on the second
>> spoke..........They are dupes.........
>>
>>
>>
>>
>> JL
>>
>>
>> Joshua Lauer
>> CCNA, CCDA, CCNP, CCDP, CCSP, CCIP, RHCE, INFOSEC,
>> CISSP, CEH
>>
>> ----- Original Message -----
>> From: "John Matus" <John.Matus@tokiom.com>
>> To: <ccielab@groupstudy.com>
>> Sent: Monday, March 20, 2006 4:58 PM
>> Subject: dumb eigrp adj question
>>
>>
>>     
>>> ok, it's been awhile............
>>>
>>> hub and spoke eigrp in as 100 all on natural
>>> interfaces
>>> the hub and 1 spoke form an adj, muut the 2nd
>>> spoke will not form the adj,
>>> or rather, the 2nd spoke keeps dropping the adj
>>> must the hub never show
>>> that the adj was formed.  i disabled
>>> split-horizon, but i forget if there
>>> is something else that i'm supposed to do
>>>
>>> R1- spoke
>>> interface Serial0/0
>>> bandwidth 1544
>>> ip address 183.1.123.1 255.255.255.0
>>> encapsulation frame-relay
>>> frame-relay map ip 183.1.123.2 102 broadcast
>>> frame-relay map ip 183.1.123.3 102
>>> no frame-relay inverse-arp
>>> frame-relay lmi-type cisco
>>>
>>> R2-hub
>>> interface Serial0/0
>>> ip address 183.1.123.2 255.255.255.0
>>> encapsulation frame-relay
>>> no ip split-horizon eigrp 100
>>> frame-relay map ip 183.1.123.1 201 broadcast
>>> frame-relay map ip 183.1.123.3 203 broadcast
>>> no frame-relay inverse-arp
>>>
>>> R3- spoke (no adj)
>>> interface Serial0/0
>>> ip address 183.1.123.2 255.255.255.0
>>> encapsulation frame-relay
>>> no ip split-horizon eigrp 100
>>> frame-relay map ip 183.1.123.1 201 broadcast
>>> frame-relay map ip 183.1.123.3 203 broadcast
>>> no frame-relay inverse-arp
>>>
>>>
>>> layer 3 us up and both spokes can ping the hub and
>>> the others spoke
>>>
>>>
>>>
>>> Regards,
>>>
>>> John D. Matus
>>> Technical Support / PAS
>>> Fujitsu Consulting
>>> 626-568-7716
>>> John.Matus@tokiom.com
>>>
>>>       
> ========================================================================================================
>
>   
>>>   This  e-mail  is  intended  solely  for  the
>>> individual  to  whom it is
>>> addressed.   The   information  contained  in
>>> this  transmission  contains
>>> confidential  and/or proprietary information or is
>>> otherwise privileged. If
>>> the reader of this message is not the intended
>>> recipient, please be advised
>>> that  any  dissemination,  distribution  or
>>> copying of this transmission is
>>> strictly  prohibited.  If  you  have  received
>>> this e-mail in error, please
>>> notify  us immediately by returning it to the
>>> sender and deleting this copy
>>> from     your     system.     Thank     you
>>> for    your    cooperation.
>>>
>>>       
> ========================================================================================================
>
>   
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>       
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>     
>
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3