From: Edward Lui (edwlui@gmail.com)
Date: Mon Mar 20 2006 - 20:04:11 GMT-3
John,
Can you ping from R3 to R2 ? Did you show the frame mapping ?
On 3/20/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
> Try with the neighbor command
>
>
> John Matus escribis:
> > oops, i forgot the broadcast after i reconfigured the inteface.....they are
> > there now but still does not form adj's.....
> >
> >
> > Regards,
> >
> > John D. Matus
> > Technical Support / PAS
> > Fujitsu Consulting
> > 626-568-7716
> > John.Matus@tokiom.com
> >
> >
> >
> >              "Ed Lui"
> >              <edwlui@gmail.com
> >              >                                                          To
> >                                        "John Matus"
> >              03/20/2006 02:13          <John.Matus@tokiom.com>
> >              PM                                                         cc
> >                                        "Joshua Lauer"
> >                                        <jslauer@hotmail.com>,
> >                                        ccielab@groupstudy.com
> >                                                                    Subject
> >                                        Re: dumb eigrp adj question
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > John,
> >
> > What about add the broadcast statement to the hub router ?
> >
> > Edward
> >
> > On 3/20/06, John Matus <John.Matus@tokiom.com> wrote:
> >
> >> opps..........wrong R3 config
> >> interface Serial0/0
> >>  ip address 183.1.123.3 255.255.255.0
> >>  encapsulation frame-relay
> >>  clockrate 2000000
> >>  frame-relay map ip 183.1.123.1 302
> >>  frame-relay map ip 183.1.123.2 302
> >>  no frame-relay inverse-arp
> >>  frame-relay lmi-type cisco
> >>
> >>
> >> Regards,
> >>
> >> John D. Matus
> >> Technical Support / PAS
> >> Fujitsu Consulting
> >> 626-568-7716
> >> John.Matus@tokiom.com
> >>
> >>
> >>
> >>             "Joshua Lauer"
> >>             <jslauer@hotmail.
> >>             com>                                                       To
> >>                                       "John Matus"
> >>             03/20/2006 02:01          <John.Matus@tokiom.com>
> >>             PM                                                         cc
> >>
> >>                                                                   Subject
> >>                                       Re: dumb eigrp adj question
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> John,
> >>
> >> Check out your IP address on the second
> >> spoke..........They are dupes.........
> >>
> >>
> >>
> >>
> >> JL
> >>
> >>
> >> Joshua Lauer
> >> CCNA, CCDA, CCNP, CCDP, CCSP, CCIP, RHCE, INFOSEC,
> >> CISSP, CEH
> >>
> >> ----- Original Message -----
> >> From: "John Matus" <John.Matus@tokiom.com>
> >> To: <ccielab@groupstudy.com>
> >> Sent: Monday, March 20, 2006 4:58 PM
> >> Subject: dumb eigrp adj question
> >>
> >>
> >>
> >>> ok, it's been awhile............
> >>>
> >>> hub and spoke eigrp in as 100 all on natural
> >>> interfaces
> >>> the hub and 1 spoke form an adj, muut the 2nd
> >>> spoke will not form the adj,
> >>> or rather, the 2nd spoke keeps dropping the adj
> >>> must the hub never show
> >>> that the adj was formed.  i disabled
> >>> split-horizon, but i forget if there
> >>> is something else that i'm supposed to do
> >>>
> >>> R1- spoke
> >>> interface Serial0/0
> >>> bandwidth 1544
> >>> ip address 183.1.123.1 255.255.255.0
> >>> encapsulation frame-relay
> >>> frame-relay map ip 183.1.123.2 102 broadcast
> >>> frame-relay map ip 183.1.123.3 102
> >>> no frame-relay inverse-arp
> >>> frame-relay lmi-type cisco
> >>>
> >>> R2-hub
> >>> interface Serial0/0
> >>> ip address 183.1.123.2 255.255.255.0
> >>> encapsulation frame-relay
> >>> no ip split-horizon eigrp 100
> >>> frame-relay map ip 183.1.123.1 201 broadcast
> >>> frame-relay map ip 183.1.123.3 203 broadcast
> >>> no frame-relay inverse-arp
> >>>
> >>> R3- spoke (no adj)
> >>> interface Serial0/0
> >>> ip address 183.1.123.2 255.255.255.0
> >>> encapsulation frame-relay
> >>> no ip split-horizon eigrp 100
> >>> frame-relay map ip 183.1.123.1 201 broadcast
> >>> frame-relay map ip 183.1.123.3 203 broadcast
> >>> no frame-relay inverse-arp
> >>>
> >>>
> >>> layer 3 us up and both spokes can ping the hub and
> >>> the others spoke
> >>>
> >>>
> >>>
> >>> Regards,
> >>>
> >>> John D. Matus
> >>> Technical Support / PAS
> >>> Fujitsu Consulting
> >>> 626-568-7716
> >>> John.Matus@tokiom.com
> >>>
> >>>
> > ========================================================================================================
> >
> >
> >>>   This  e-mail  is  intended  solely  for  the
> >>> individual  to  whom it is
> >>> addressed.   The   information  contained  in
> >>> this  transmission  contains
> >>> confidential  and/or proprietary information or is
> >>> otherwise privileged. If
> >>> the reader of this message is not the intended
> >>> recipient, please be advised
> >>> that  any  dissemination,  distribution  or
> >>> copying of this transmission is
> >>> strictly  prohibited.  If  you  have  received
> >>> this e-mail in error, please
> >>> notify  us immediately by returning it to the
> >>> sender and deleting this copy
> >>> from     your     system.     Thank     you
> >>> for    your    cooperation.
> >>>
> >>>
> > ========================================================================================================
> >
> >
> >>> _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
> >>>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3