From: John Matus (jmatus@pacbell.net)
Date: Tue Mar 21 2006 - 01:27:32 GMT-3
i ended up just rebooting the routers and viola....magic. i don't know why
the magic didn't happen before.............:-)
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Edward Lui" <edwlui@gmail.com>
To: "Victor Cappuccio" <cvictor@protokolgroup.com>
Cc: "John Matus" <John.Matus@tokiom.com>; <ccielab@groupstudy.com>; "Joshua
Lauer" <jslauer@hotmail.com>
Sent: Monday, March 20, 2006 3:04 PM
Subject: Re: dumb eigrp adj question
> John,
>
> Can you ping from R3 to R2 ? Did you show the frame mapping ?
>
>
>
> On 3/20/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
>> Try with the neighbor command
>>
>>
>> John Matus escribis:
>> > oops, i forgot the broadcast after i reconfigured the inteface.....they
>> > are
>> > there now but still does not form adj's.....
>> >
>> >
>> > Regards,
>> >
>> > John D. Matus
>> > Technical Support / PAS
>> > Fujitsu Consulting
>> > 626-568-7716
>> > John.Matus@tokiom.com
>> >
>> >
>> >
>> > "Ed Lui"
>> > <edwlui@gmail.com
>> > >
>> > To
>> > "John Matus"
>> > 03/20/2006 02:13 <John.Matus@tokiom.com>
>> > PM
>> > cc
>> > "Joshua Lauer"
>> > <jslauer@hotmail.com>,
>> > ccielab@groupstudy.com
>> >
>> > Subject
>> > Re: dumb eigrp adj question
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > John,
>> >
>> > What about add the broadcast statement to the hub router ?
>> >
>> > Edward
>> >
>> > On 3/20/06, John Matus <John.Matus@tokiom.com> wrote:
>> >
>> >> opps..........wrong R3 config
>> >> interface Serial0/0
>> >> ip address 183.1.123.3 255.255.255.0
>> >> encapsulation frame-relay
>> >> clockrate 2000000
>> >> frame-relay map ip 183.1.123.1 302
>> >> frame-relay map ip 183.1.123.2 302
>> >> no frame-relay inverse-arp
>> >> frame-relay lmi-type cisco
>> >>
>> >>
>> >> Regards,
>> >>
>> >> John D. Matus
>> >> Technical Support / PAS
>> >> Fujitsu Consulting
>> >> 626-568-7716
>> >> John.Matus@tokiom.com
>> >>
>> >>
>> >>
>> >> "Joshua Lauer"
>> >> <jslauer@hotmail.
>> >> com>
>> >> To
>> >> "John Matus"
>> >> 03/20/2006 02:01 <John.Matus@tokiom.com>
>> >> PM
>> >> cc
>> >>
>> >>
>> >> Subject
>> >> Re: dumb eigrp adj question
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> John,
>> >>
>> >> Check out your IP address on the second
>> >> spoke..........They are dupes.........
>> >>
>> >>
>> >>
>> >>
>> >> JL
>> >>
>> >>
>> >> Joshua Lauer
>> >> CCNA, CCDA, CCNP, CCDP, CCSP, CCIP, RHCE, INFOSEC,
>> >> CISSP, CEH
>> >>
>> >> ----- Original Message -----
>> >> From: "John Matus" <John.Matus@tokiom.com>
>> >> To: <ccielab@groupstudy.com>
>> >> Sent: Monday, March 20, 2006 4:58 PM
>> >> Subject: dumb eigrp adj question
>> >>
>> >>
>> >>
>> >>> ok, it's been awhile............
>> >>>
>> >>> hub and spoke eigrp in as 100 all on natural
>> >>> interfaces
>> >>> the hub and 1 spoke form an adj, muut the 2nd
>> >>> spoke will not form the adj,
>> >>> or rather, the 2nd spoke keeps dropping the adj
>> >>> must the hub never show
>> >>> that the adj was formed. i disabled
>> >>> split-horizon, but i forget if there
>> >>> is something else that i'm supposed to do
>> >>>
>> >>> R1- spoke
>> >>> interface Serial0/0
>> >>> bandwidth 1544
>> >>> ip address 183.1.123.1 255.255.255.0
>> >>> encapsulation frame-relay
>> >>> frame-relay map ip 183.1.123.2 102 broadcast
>> >>> frame-relay map ip 183.1.123.3 102
>> >>> no frame-relay inverse-arp
>> >>> frame-relay lmi-type cisco
>> >>>
>> >>> R2-hub
>> >>> interface Serial0/0
>> >>> ip address 183.1.123.2 255.255.255.0
>> >>> encapsulation frame-relay
>> >>> no ip split-horizon eigrp 100
>> >>> frame-relay map ip 183.1.123.1 201 broadcast
>> >>> frame-relay map ip 183.1.123.3 203 broadcast
>> >>> no frame-relay inverse-arp
>> >>>
>> >>> R3- spoke (no adj)
>> >>> interface Serial0/0
>> >>> ip address 183.1.123.2 255.255.255.0
>> >>> encapsulation frame-relay
>> >>> no ip split-horizon eigrp 100
>> >>> frame-relay map ip 183.1.123.1 201 broadcast
>> >>> frame-relay map ip 183.1.123.3 203 broadcast
>> >>> no frame-relay inverse-arp
>> >>>
>> >>>
>> >>> layer 3 us up and both spokes can ping the hub and
>> >>> the others spoke
>> >>>
>> >>>
>> >>>
>> >>> Regards,
>> >>>
>> >>> John D. Matus
>> >>> Technical Support / PAS
>> >>> Fujitsu Consulting
>> >>> 626-568-7716
>> >>> John.Matus@tokiom.com
>> >>>
>> >>>
>> > ========================================================================================================
>> >
>> >
>> >>> This e-mail is intended solely for the
>> >>> individual to whom it is
>> >>> addressed. The information contained in
>> >>> this transmission contains
>> >>> confidential and/or proprietary information or is
>> >>> otherwise privileged. If
>> >>> the reader of this message is not the intended
>> >>> recipient, please be advised
>> >>> that any dissemination, distribution or
>> >>> copying of this transmission is
>> >>> strictly prohibited. If you have received
>> >>> this e-mail in error, please
>> >>> notify us immediately by returning it to the
>> >>> sender and deleting this copy
>> >>> from your system. Thank you
>> >>> for your cooperation.
>> >>>
>> >>>
>> > ========================================================================================================
>> >
>> >
>> >>> _______________________________________________________________________
>> >>> Subscription information may be found at:
>> >>> http://www.groupstudy.com/list/CCIELab.html
>> >>>
>> >> _______________________________________________________________________
>> >> Subscription information may be found at:
>> >> http://www.groupstudy.com/list/CCIELab.html
>> >>
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3