From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Sat Apr 21 2007 - 14:06:39 ART
You can configure bidirectional mode with BSR as well...
Router(config)# ip pim rp-candidate* *type number [*group-list *access-list]
*bidir *
Ronnie
On 4/21/07, Filyurin, Yan <yan.filyurin@eds.com> wrote:
>
> I can't speak for BSR, as I don't remember trying it, even though I am
> sure it would work, with auto-rp bidir PIM can work. All you have to do
> is when your announce RP for a certain group range is to say bidir in
> the end and the groups will become bidirectional. I've never explored
> it to the depth, but I have done labs where I experimented with it and
> go ping results.
>
> One thing I haven't fully figured out yet, is when would be a good
> scenario to enable it and be able to get around some of the issues, like
> being able to a certain interface be both in incoming and outgoing
> interface list.
>
> Anyone else?
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Riapolov, Bradley
> Sent: Saturday, April 21, 2007 12:11 PM
> To: ccielab@groupstudy.com
> Subject: Bidir PIM
>
> Do I correctly understand that the only way to run bidir PIM is to
> STATICALLY
> configure the RP (with ip pim bidir-enable and ip pim rp-address
> rp-address
> [access-list] [override] [bidir] )? In other words, are auto-rp/bsr and
> bidir
> mutually exclusive?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART