From: Riapolov, Bradley (BRiapolo@wm.com)
Date: Sat Apr 21 2007 - 14:09:50 ART
thank you, i should have looked myself :(
-----Original Message-----
From: Ronnie Angello [mailto:ronnie.angello@gmail.com]
Sent: Saturday, April 21, 2007 12:07 PM
To: Filyurin, Yan
Cc: Riapolov, Bradley; ccielab@groupstudy.com
Subject: Re: Bidir PIM
You can configure bidirectional mode with BSR as well...
Router(config)# ip pim rp-candidate type number [group-list access-list] bidir
Ronnie
On 4/21/07, Filyurin, Yan < yan.filyurin@eds.com> wrote:
I can't speak for BSR, as I don't remember trying it, even though I am
sure it would work, with auto-rp bidir PIM can work. All you have to do
is when your announce RP for a certain group range is to say bidir in
the end and the groups will become bidirectional. I've never explored
it to the depth, but I have done labs where I experimented with it and
go ping results.
One thing I haven't fully figured out yet, is when would be a good
scenario to enable it and be able to get around some of the issues, like
being able to a certain interface be both in incoming and outgoing
interface list.
Anyone else?
-----Original Message-----
From: nobody@groupstudy.com [mailto: nobody@groupstudy.com] On Behalf Of
Riapolov, Bradley
Sent: Saturday, April 21, 2007 12:11 PM
To: ccielab@groupstudy.com
Subject: Bidir PIM
Do I correctly understand that the only way to run bidir PIM is to
STATICALLY
configure the RP (with ip pim bidir-enable and ip pim rp-address
rp-address
[access-list] [override] [bidir] )? In other words, are auto-rp/bsr and
bidir
mutually exclusive?
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART