From: Edison Ortiz (edisonmortiz@gmail.com)
Date: Tue Jun 05 2007 - 12:15:07 ART
That has been the case for a long time, but not for long
http://www.hp.com/rnd/itmgrnews/add_lldp_standard.htm
__
Edison Ortiz
(Routing & Switching, CCIE # 17943)
----- Original Message -----
From: "Greg Wendel" <gwendel@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Tuesday, June 05, 2007 10:49 AM
Subject: Cisco switch cdp neighbor with an HP switch.
> Check out the output below. I know that Cisco CDP is proprietary, so I am
> trying to find out how this is happening.
>
> Did Cisco licence CDP to HP for this model switch?
>
>
> NAMEREMOVED> (enable) sh cdp neigh
> * - indicates vlan mismatch.
> # - indicates duplex mismatch.
> Port Device-ID Port-ID
> Platform
> ------- ------------------------------- -------------------------
> ------------
> 6/1 HP ProCurve Switch 2626(001185- 25 HP 2626
> NAMEREMOVED> (enable)
>
> HP ProCurve Switch 2626# sh cdp neigh
>
> CDP neigbors information
>
> Port Device ID | Platform
> Capability
> ---- ----------------------------- + ----------------------------
> -----------
> 25 NAMEREMOVED | WS-C4006 B S
>
> HP ProCurve Switch 2626# sh runn
>
> Running configuration:
>
> ; J4900A Configuration Editor; Created on release #H.07.50
>
> hostname "HP ProCurve Switch 2626"
> cdp run
> snmp-server community "public" Unrestricted
> vlan 1
> name "DEFAULT_VLAN"
> untagged 1-26
> ip address dhcp-bootp
> exit
>
> HP ProCurve Switch 2626# sh ver
> Image stamp: /sw/code/build/fish(ff03)
> May 6 2004 16:10:05
> H.07.50
> 4229
> Boot Image: Primary
> HP ProCurve Switch 2626#
>
>
>
>
>
>
> --
> Gregory Wendel
> Springfield VA, 22153
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:46 ART