From: Greg Wendel (gwendel@gmail.com)
Date: Tue Jun 05 2007 - 11:49:16 ART
Check out the output below. I know that Cisco CDP is proprietary, so I am
trying to find out how this is happening.
Did Cisco licence CDP to HP for this model switch?
NAMEREMOVED> (enable) sh cdp neigh
* - indicates vlan mismatch.
# - indicates duplex mismatch.
Port Device-ID Port-ID Platform
------- ------------------------------- -------------------------
------------
6/1 HP ProCurve Switch 2626(001185- 25 HP 2626
NAMEREMOVED> (enable)
HP ProCurve Switch 2626# sh cdp neigh
CDP neigbors information
Port Device ID | Platform
Capability
---- ----------------------------- + ----------------------------
-----------
25 NAMEREMOVED | WS-C4006 B S
HP ProCurve Switch 2626# sh runn
Running configuration:
; J4900A Configuration Editor; Created on release #H.07.50
hostname "HP ProCurve Switch 2626"
cdp run
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-26
ip address dhcp-bootp
exit
HP ProCurve Switch 2626# sh ver
Image stamp: /sw/code/build/fish(ff03)
May 6 2004 16:10:05
H.07.50
4229
Boot Image: Primary
HP ProCurve Switch 2626#
-- Gregory Wendel Springfield VA, 22153
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:46 ART