From: Gavin Lawson (GavinL@titan.net.au)
Date: Tue Jun 05 2007 - 22:31:47 ART
HI
So is LLDP only for Ethernet Devices?
This extract is from the article.
"LLDP is a neighbor discovery protocol that allows Ethernet devices to
advertise information about themselves and store information that they
discover in a multi-vendor environment."
GL
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Edison Ortiz
Sent: Tuesday, 5 June 2007 11:15 PM
To: Greg Wendel; Cisco certification
Subject: Re: Cisco switch cdp neighbor with an HP switch.
That has been the case for a long time, but not for long
http://www.hp.com/rnd/itmgrnews/add_lldp_standard.htm
__
Edison Ortiz
(Routing & Switching, CCIE # 17943)
----- Original Message -----
From: "Greg Wendel" <gwendel@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Tuesday, June 05, 2007 10:49 AM
Subject: Cisco switch cdp neighbor with an HP switch.
> Check out the output below.  I know that Cisco CDP is proprietary, so
I am
> trying to find out how this is happening.
>
> Did Cisco licence CDP to HP for this model switch?
>
>
> NAMEREMOVED> (enable) sh cdp neigh
> * - indicates vlan mismatch.
> # - indicates duplex mismatch.
> Port     Device-ID                       Port-ID 
> Platform
> ------- ------------------------------- -------------------------
> ------------
> 6/1     HP ProCurve Switch 2626(001185- 25                        HP
2626
> NAMEREMOVED> (enable)
>
> HP ProCurve Switch 2626# sh cdp neigh
>
> CDP neigbors information
>
>  Port Device ID                     | Platform
> Capability
>  ---- ----------------------------- + ----------------------------
> -----------
>  25   NAMEREMOVED      | WS-C4006                     B S
>
> HP ProCurve Switch 2626# sh runn
>
> Running configuration:
>
> ; J4900A Configuration Editor; Created on release #H.07.50
>
> hostname "HP ProCurve Switch 2626"
> cdp run
> snmp-server community "public" Unrestricted
> vlan 1
>   name "DEFAULT_VLAN"
>   untagged 1-26
>   ip address dhcp-bootp
>   exit
>
> HP ProCurve Switch 2626# sh ver
> Image stamp:    /sw/code/build/fish(ff03)
>                May  6 2004 16:10:05
>                H.07.50
>                4229
> Boot Image:     Primary
> HP ProCurve Switch 2626#
>
>
>
>
>
>
> -- 
> Gregory Wendel
> Springfield VA, 22153
>
>
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:47 ART