From: WorkerBee (ciscobee@gmail.com)
Date: Fri Oct 26 2007 - 22:38:51 ART
Anyone knows how to make this PoE card work? I tried connecting an IP
Phone to the port, it shows as down and not supply power to the IP
Phone. It is up when I connect to another switch. I am getting rid of
3560-PoE switches for space saving cards instead.
I am running 12.4(15)T1 image but under the interface configuration
mode, I don't see anything related to command 'power inline....'.
I am sure the card is recognize as follows:
Yaka#show inventory
NAME: "4 Port FE Switch on Slot 0 SubSlot 3", DESCR: "4 Port FE Switch"
PID: HWIC-4ESW , VID: VN/A, SN: FOC09453V5Y
NAME: "WIC/VIC/HWIC 3 Power Daughter Card", DESCR: "4-Port HWIC-ESW
Power Daughter Card"
PID: ILPM-4 , VID: VN/A, SN: FOC09454GU0
Yaka#show ip int brief
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/3/0 unassigned YES unset up down
FastEthernet0/3/1 unassigned YES unset up down
FastEthernet0/3/2 unassigned YES unset up down
FastEthernet0/3/3 unassigned YES unset up down
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:18 ART