From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Oct 26 2007 - 23:39:23 ART
Do you have the inline power supply installed or a standard power
supply? You'll need the inline power supply in addition to the PoE
daughter card. You can tell what you have by issuing the show power
inline (if you get output like below you have inline power) or by just
looking at the back of the 2811. If it's an inline power supply the
power supply will have a little black phone it.
R1#show power inline
PowerSupply SlotNum. Maximum Allocated Status
----------- -------- ------- --------- ------
INT-PS 0 160.000 12.600 PS GOOD
Interface Config Device Powered PowerAllocated
--------- ------ ------ ------- --------------
Fa0/1/0 auto Cisco On 6.300 Watts
Fa0/1/1 auto Cisco On 6.300 Watts
Fa0/1/2 auto Unknown Off 0.000 Watts
Fa0/1/3 auto Unknown Off 0.000 Watts
R1#
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-852-3995 (Outside the US and Canada)
WorkerBee wrote:
> Anyone knows how to make this PoE card work? I tried connecting an IP
> Phone to the port, it shows as down and not supply power to the IP
> Phone. It is up when I connect to another switch. I am getting rid of
> 3560-PoE switches for space saving cards instead.
>
> I am running 12.4(15)T1 image but under the interface configuration
> mode, I don't see anything related to command 'power inline....'.
>
> I am sure the card is recognize as follows:
>
> Yaka#show inventory
> NAME: "4 Port FE Switch on Slot 0 SubSlot 3", DESCR: "4 Port FE Switch"
> PID: HWIC-4ESW , VID: VN/A, SN: FOC09453V5Y
>
> NAME: "WIC/VIC/HWIC 3 Power Daughter Card", DESCR: "4-Port HWIC-ESW
> Power Daughter Card"
> PID: ILPM-4 , VID: VN/A, SN: FOC09454GU0
>
>
> Yaka#show ip int brief
> Interface IP-Address OK? Method Status
> Protocol
> FastEthernet0/3/0 unassigned YES unset up down
> FastEthernet0/3/1 unassigned YES unset up down
> FastEthernet0/3/2 unassigned YES unset up down
> FastEthernet0/3/3 unassigned YES unset up down
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:18 ART